Manual

VISIONEER ROADWARRIOR 3 SCANNER USER’S GUIDE
166
• Force UI-less—select this option to prevent this scanner interface from opening when you initiate a scan in
the scanning application. This option will only work if your scanning application supports UI-less scanning.
You may also need to select Auto close on transfer complete for this option to work.
• Profile overrides capabilities—some scanning applications have the option to adjust the scan settings
and scan without opening this scanner interface. The next time this interface opens, the last used settings
will match the application settings that were used to scan. Select this option to have the settings reset to the
last ones used when this interface was open.
• Enable user compression—this option is enabled only if the scanner and the software allow manual
adjustment of the image compression.
• Remember compression—when a compression option is available for user adjustment, it cannot be saved
as part of a preset. Select this option to have the compression setting saved.
WIA DRIVER
• Use default WIA UI—select this option to display the Microsoft WIA interface instead of the TWAIN
interface in WIA 2.0 applications.
• Emulate WIA 1.0—select this option to display the TWAIN interface for WIA 1.0 compatible applications.
When this option is selected, WIA 2.0 applications will use the Microsoft WIA interface.
APPLICATION SETTINGS
ONETOUCH SETTINGS
AutoLaunch™ is the scanner’s ability to automatically start scanning when it detects a page has been inserted into
the scanner.