Manual

VISIONEER ROADWARRIOR 3 SCANNER USER’S GUIDE
170
CLEANING YOUR SCANNER
Clean the inside of the scanner to remove dust and paper debris from the scanner glass, pickup and feed rollers.
Cleaning the inside of the scanner helps to keep your scanner operating at optimum performance. Dust
accumulation on the rollers will prevent documents from feeding straight through the scanner, dust on the
scanner glass will appear as lines in the scanned image.
You should clean the inside of the scanner at least once a week or as needed depending on how often the
scanner is used. If cleaning the scanner does not resolve any image quality issues, please follow the instructions in
the next section for calibrating the scanner.
You will need the cleaning cloth provided with your scanner.
1. Place your thumbs on either side of the paper feed slot, underneath the top panel of the scanner.
2. Hold the scanner sides firmly and pull the scanner top up to release it from the body of the scanner.
Use both hands to open the scanner, the top is held down with locking arms on both sides of the paper feed
slot. If you open only one side, you may warp the scanner top.