Manual

VISIONEER ROADWARRIOR 3 SCANNER USER’S GUIDE
30
CONFIGURING ONETOUCH AUTOLAUNCH
When you installed the scanner, the software configured OneTouch with all applications on your computer that
you can scan to. The button consists of: a Destination Application, a Scan Configuration, and a File Format.
You can open the OneTouch Properties window by pressing the button on the scanner, or by opening it from the
OneTouch Panel on screen.
1. Click on the OneTouch icon.
2. Right click on the PaperIn button, single left click on the detailed information.
3. The OneTouch Properties window opens.
Changing the PaperIn setting:
1. Click on an application name in the Select Destination list.
2. Select a file format in the Select Format panel.
3. Select a scanning configuration in the Select Configuration list.
4. Click on OK to save the changes.
5. Place a page in the scanner.
6. The scanner starts scanning and sends the image to the application, with the file format and scanning
configuration you specified.
N
OTE: The next section contains detailed information on making changes to the OneTouch Properties window.
Please see Changing the Button Settings on page 40 for instructions.
N
OTE: Some of the options on the OneTouch Properties Window are “grayed out” and are not available, these
options are not appropriate for your scanner model.
Right click on PaperIn, left lick on
the detailed information, or press
the button on the scanner to open
the OneTouch Properties.