Manual

VISIONEER ROADWARRIOR 3 SCANNER USER’S GUIDE
48
• Invert image—reverses the color of each pixel in the scanned image.
When scanning in black and white, each pixel is reversed from black to white and white to black. When
scanning in grayscale each pixel is reversed to the opposite level of gray. When scanning in color each pixel
is reversed to the opposite color in the color wheel.
• Skip blank originals—select this option to have the scanner detect if a blank page has been fed through
the scanner, and remove it from the final file. Typically you might use this option when scanning a stack of
two-sided pages which have a number of blank sides.
Sensitivity—you can adjust the sensitivity level of the blank image detection.
Note that when the Options tab feature Use job separator in multi-page batch is enabled, and the option
selected is When a blank page is detected, the sensitivity level for Skip Blank Originals is the sensitivity
level that will be used when both features are enabled.
Note that when the feature Use job separator in multi-page batch is enabled, and the option selected is
When the number of images reaches, the blank originals are discarded before the images are counted. For
example, if you scan 3 pages in duplex mode, each side of the page is counted as an image and the total
number of images is 6. When Skip Blank Originals is enabled, and 2 of the 3 pages in the stack are blank on
one side, the total number of images counted is 4 not 6.
• Manual Feed Mode—select this option to enable a delay from when the last page is scanned and when the
scanner stops the scan job.
To scan with manual feed mode:
1. Select Manual feed mode.
2. In the Timeout field, input the amount of time you want the scanner to wait from when the last page is
scanned and when the scanner stops scanning.
3. Place a document in the scanner.
4. Click Scan.
5. The scanning progress dialogue on-screen will display a countdown indicating how much time you
have to place the next document in the scanner.
6. When you are done scanning all pages in your document, you can click on Abort to stop the timer or
simply let the timer run out.
Original Image Inverted Image