Manual

VISIONEER ROADWARRIOR 3 SCANNER USER’S GUIDE
58
CONFIGURE BEFORE SCAN
You can set up the scanner so that, when you put a page in, a different scanning interface opens before the
scanning starts. You can then use the interface to change the Resolution, Scan Mode, and other settings. When
you scan, the scanned image will still be sent as the file type and to the same Destination Application already
selected in the One Touch Properties window for that button. To set up the scanner for this capability, you select
Configure Before Scan from the scan configuration list.
The option Configure Before Scan can be used when you want to scan multiple pages and have them appear in
one file.
1. Open the OneTouch Properties window.
2. Select the scan configuration Configure Before Scan.
3. Click OK or Apply on the OneTouch Properties window.
TO SCAN USING CONFIGURE BEFORE SCAN
1. Place a document in the paper feed slot.
2. The TWAIN Interface opens.
3. Choose your scan settings, such as the Picture Type of Color, Grayscale or Black & White, Resolution in DPI,
and Page Size.
4. Click the Scan button on the TWAIN Interface.
5. The item is scanned. When finished, click the Done button and the image will be sent to the Destination
Application specified in the OneTouch Properties window.