Visioneer ® Mobility User's Guide
Visioneer Mobility User’s Guide COPYRIGHT INFORMATION Copyright © 2011 Visioneer, Inc. All Rights Reserved. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. The Visioneer® brand name and logo are registered trademarks of Visioneer, Inc. The PaperPort® and OmniPage® Pro brand name and logo are registered trademarks of Nuance Communications, Inc.
Restricted Rights Legend Use, duplication, or disclosure is subject to restrictions as set forth in contract subdivision (c)(1)(ii) of the Rights in Technical Data and Computer Software Clause 52.227FAR14. Material scanned by this product may be protected by governmental laws and other regulations, such as copyright laws. The customer is solely responsible for complying with all such laws and regulations.
TABLE OF CONTENTS 5 TA B L E O F C O N T E N T S Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 The Visioneer Mobility Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Insert the Battery . . . . . . . . . . . . . . .
TABLE OF CONTENTS
Welcome Thank you for purchasing the Visioneer Mobility sheetfed scanner. With this scanner you can scan directly to a memory card or USB flash drive without connecting the scanner to a computer. WHAT’S IN THE BOX Before proceeding, check the contents of the box. If items are missing or damaged, contact the dealer where you purchased the scanner.
VISIONEER MOBILITY SCANNER USER’S GUIDE THE VISIONEER MOBILITY SCANNER Status LEDs Function button Scan functions Power button Battery LED Glass release button USB flash drive port Alignment arrow Paper feed slot USB cable port Memory card slot Battery compartment Paper feed slot—Insert an item face up in the scanner, aligned to the arrow at the end of the paper feed slot. Control panel—Scanner controls.
WELCOME 9 Scans in black & white at 300dpi and creates an Adobe PDF (*.pdf ) file. Scans in color at 300dpi and creates an Adobe PDF (*.pdf ) file. • Battery LED—This light indicates the scanner’s power status. Off On Blink The scanner is not plugged in, the battery is not in the scanner, or the scanner is turned off. The scanner power is on. The battery power is getting low and needs to be recharged. USB cable port—Connect the provided USB cable to charge the scanner.
VISIONEER MOBILITY SCANNER USER’S GUIDE INSERT THE BATTERY The battery comes pre-installed in the scanner’s battery compartment. Simply turn the scanner over and remove the protective plastic strip from the battery compartment. If the battery is not pre-installed in your unit, or if you need to replace the battery for any reason, please follow these instructions for installing the battery. Warning: Only use the battery model provided with the scanner (NP120 for 3.7V 1700mAh). 1.
WELCOME 11 CONNECT THE SCANNER TO CHARGE THE BATTERY Important! • Allow the battery to charge for at least 8 hours before using the scanner the first time. Note that recharging the battery, after using the scanner, takes only 4 hours for a completely drained battery. • Do not turn on the scanner power when charging the battery. Assemble the power adapter: 1. Select the power plug adapter that is appropriate for the wall outlet in your country. North America, U.K., Europe 2.
2. VISIONEER MOBILITY SCANNER USER’S GUIDE Plug the power supply into a wall outlet. Note: You can also charge the scanner battery by plugging both ends of the USB cable into two USB ports on your computer.
WELCOME 13 REGISTER YOUR SCANNER Registering your scanner is important as it provides you with access to our free telephone support service. Registration also gives you free access to software updates for your scanner. You will need an active internet connection to register your scanner. If you do not have internet access, you can contact our Customer Service department to register the scanner. Please refer to the Technical Support Card, that your received with the scanner, for our contact information. 1.
VISIONEER MOBILITY SCANNER USER’S GUIDE
Scanning You can scan approximately 300 pages on each battery charge. You can scan items between 2”x2” and 8.5”x11.69”, and the scanner will automatically crop the scanned image to the width and height of the item scanned. MEMORY CARD OR USB FLASH DRIVE You can only scan to either a memory card or a USB flash drive. If you have both inserted in the scanner, the scanner will detect and use the memory card for scanning. 1. Remove the memory card from its case. 2.
VISIONEER MOBILITY SCANNER USER’S GUIDE 6. Insert an item face up in the paper feed slot, aligned to the left side of the scanner. 7. The scanner detects the page and starts to feed it through the scanner. Note that there will be a short pause after you insert the page before the scanner starts to feed the page. This pause allows you to straighten the item in the paper feed slot. When scanning is finished, the image is saved on the memory card or USB flash drive. 8.
SCANNING 17 SMARTPHONES You can connect the scanner to your Smartphone and scan directly to the phone’s storage. When the phone is connected to the scanner, the scanner detects the phone’s memory card as the USB flash drive. 1. If a memory card is in the scanner, remove it before proceeding with these instructions. 2. Connect the phone’s USB cable to the phone. 3. Connect the other end of the USB cable to the USB port in the back of the scanner. 4. 5. 6. 7. Turn on the scanner.
VISIONEER MOBILITY SCANNER USER’S GUIDE 9. The scanner detects the page and starts to feed it through the scanner. Note that there will be a short pause after you insert the page before the scanner starts to feed the page. This pause allows you to straighten the item in the paper feed slot. 10. When scanning is finished, the image is saved to the phone. RETRIEVING THE SCANNED IMAGES Please follow your normal process for viewing, saving, or forwarding files on your phone.
SCANNING 3. 4. 5. 6. 7. 8. 19 Turn on the scanner. Select the “disc drive” option on your phone when prompted. At this time the scanner LEDs just continuously flash. Change the phone’s USB connection type from the “disc drive” option to the “sync” option. Immediately change the phone’s USB connection type back to “disc drive”. The phone should now initialize its storage properly and the scanner LEDs should stop flashing.
VISIONEER MOBILITY SCANNER USER’S GUIDE 7. Insert an item face up in the paper feed slot, aligned to the left side of the scanner. 8. The scanner detects the page and starts to feed it through the scanner. Note that there will be a short pause after you insert the page before the scanner starts to feed the page. This pause allows you to straighten the item in the paper feed slot. When scanning is finished, the images show in the iPad gallery ready to be imported.
Maintenance This section contains scanner information about regular maintenance, specifications and spare parts. CALIBRATING YOUR SCANNER The scanner needs to be calibrated as part of your monthly maintenance of the scanner. If your scanned images have black or colored vertical lines this may be a sign that you need to perform a calibration. If calibrating the scanner does not resolve the problem, please go to the next section and follow the steps for cleaning the scanner.
VISIONEER MOBILITY SCANNER USER’S GUIDE CLEANING YOUR SCANNER If you still see streaks or lines in the scanned image after calibrating the scanner, use the cleaning swab to clean the scanner glass. 1. Dampen the tip of the cleaning swab with some Isopropyl rubbing alcohol (95%) 2. Facing the back of the scanner, press and hold the button on the side of the scanner. This button separates the glass from the rollers for cleaning.
MAINTENANCE VISIONEER MOBILITY SCANNER SPECIFICATIONS Optical resolution Bit depth Maximum item size Minimum item size Scan method Scanning specifications Scanning Speed Paper Thickness Image Sensor Light source Interface Scanner body dimensions Width Depth Height Weight Operating temperature Relative humidity Battery 300 dpi 24-bit color, 1-bit bitonal (black & white) 8.5" x 11.69"(216mm x 297mm) 2.0" x 2.0" (51mm x 51mm) Single Sheet Fed 10 seconds per page @ 200 dpi in all color modes 16 - 28 lbs. (0.
VISIONEER MOBILITY SCANNER USER’S GUIDE VISIONEER MOBILITY SPARE PART LIST Please use the following part name and number when ordering a replacement part for your scanner. Part Name Part Number Carrying bag 88-0630-000 Battery 28-0008-000 USB Y-Cable 35-0232-000 Memory card 51-0002-0000 Power Supply 35-0095-000 or 35-0095-001 Plug adapters 35-0096-000 (U.S.) 35-0097-000 (EUR) 35-0098-000 (U.K.
visioneer Copyright © 2011 Visioneer, Inc.
