Visioneer MX 200 Digital Camera User’s Guide FOR WINDOWS
COPYRIGHT INFORMATION Copyright © 2002 Visioneer, Inc. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. The Visioneer brand name and logo are registered trademarks of Visioneer, Inc. The PaperPort brand name and logo are registered trademarks of ScanSoft, Inc. Microsoft is a U.S. registered trademark of Microsoft Corporation. Windows is a trademark of Microsoft Corporation.
Visioneer’s Limited Product Warranty If you find physical defects in the materials or the workmanship used in making the product described in this document, Visioneer will repair, or at its option, replace, the product at no charge to you, provided you return it (postage prepaid, with proof of your purchase from the original reseller) during the 3-month period after the date of your original purchase of the product.
FCC Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for the class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed, and used in accordance with the instructions, may cause harmful interference to radio communications.
i TABLE OF C ON TE NT S Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Camera Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Camera Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Front View . . . . . . . . . . . . . . . . . . . . . .
ii VISIONEER MX 200 DIGITAL CAMERA USER’S GUIDE Install Software on Your Computer . . . . . . . . . . . . . . . . Connect to Your Computer the First Time . . . . . . . . . . Copying Photos to Your Computer . . . . . . . . . . . . . . . . . . . Using Your Camera as a PC Camera . . . . . . . . . . . . . . . . . . . Connecting to a Television . . . . . . . . . . . . . . . . . . . . . . . . . . Printing Directly to a Printer . . . . . . . . . . . . . . . . . . . . . . . . Troubleshooting . . . . . . . . . . .
WELCOME Congratulations on the purchase of your Visioneer MX 200 digital camera. This user’s guide will step you through the set up, configuration, and use of your camera. CAMERA FEATURES ■ Digital Zoom (up to 3x) ■ Up to 2048 x 1536 resolution ■ Color LCD viewfinder screen ■ Video clip recording (up to 1 minute) ■ USB 1.
2 VISIONEER MX 200 DIGITAL CAMERA USER’S GUIDE SAFETY INFORMATION ■ Do not look at the sun through the viewfinder. Viewing the sun or other strong light source through the viewfinder could cause permanent visual impairment. ■ Do not disassemble the camera. Touching the camera’s internal parts could result in injury. In the event of malfunction, only a qualified technician should repair your camera. Should the camera break as a result of a fall or other accident, take it to an authorized service center.
SAFETY INFORMATION 3 batteries in or expose them to water. Discontinue use immediately if you notice any changes in the batteries such as discoloration, deformation, or leakage. ■ Use caution when operating the flash. Do not use the flash in close proximity to human or animal eyes. Exposure to the intense light produced by the flash may damage eyesight. Particular care should be used when photographing infants— keep the flash at least three feet from infant’s eyes.
4 VISIONEER MX 200 DIGITAL CAMERA USER’S GUIDE WHAT’S IN THE BOX Before using your digital camera, check the contents of the box to make sure that all parts are included. If any items are missing or damaged, contact the dealer where you purchased the camera.
CAMERA COMPONENTS 5 CAMERA COMPONENTS The following pages show the components of your camera. FRONT VIEW 1 2 3 4 5 6 1. Shutter Button—Used to take a picture. 2. Built-in Flash—Allows picture taking in low light. 3. Light Sensor—Detects ambient light to determine whether or not the flash is needed. 4. Viewfinder—Used to frame the picture you are taking. 5. Self-timer LED—When the self-timer option is in use, blinks for ten seconds before the camera takes a picture. 6.
6 VISIONEER MX 200 DIGITAL CAMERA USER’S GUIDE BACK VIEW 1 2 3 4 5 6 7 8 14 13 12 11 10 9 1. Viewfinder—Used to frame the picture you are taking. 2. Status LED—Shows the picture-taking status of the camera. When the camera is available to take a picture or accept user commands, the LED is a solid green light. When the camera is unavailable, the LED flashes. 3. On/Off button—Used to turn the camera on and off. 4. Zoom Out/Thumbnail—In Snapshot mode, the camera zooms out from the subject.
CAMERA COMPONENTS 7 6. Mode Dial—Selects the cameras mode: Video, Preset, Snapshot, Playback, Set Up, and PC. 7. USB, Video Out, and AC Adapter Ports—The USB (Universal Serial Bus) port is used to connect the camera to a computer. The Video Out port connects the camera to a television. The AC adapter port connects an AC adapter to an external source of electricity. 8. Hand Strap Loop—Used to connect the camera to the supplied hand strap. 9.
8 VISIONEER MX 200 DIGITAL CAMERA USER’S GUIDE BOTTOM VIEW 1 2 3 4 1. Tripod Connector—Attaches the camera to a tripod. 2. Battery/Memory Card Cover—Covers the battery chamber and memory card slot. 3. Memory Card Slot—Uses a SmartMediaTM card to store images. 4. Battery Chamber—Requires two AA alkaline batteries.
GETTING READY TO TAKE PICTURES 9 GETTING READY TO TAKE PICTURES Complete the following installation and setup steps to prepare your camera for taking pictures. INSTALL THE MEMORY CARD AND BATTERIES Note: If you prefer to store your photos on the camera’s internal memory, you do not need to install a memory card. To install the memory card: 1. Open the battery/memory card cover. 2. ■ Press on the cover and slide it in the direction of the arrow, toward the outside edge of the camera.
10 VISIONEER MX 200 DIGITAL CAMERA USER’S GUIDE To install the batteries: 1. Insert the batteries into the battery chamber making sure the positive and negative ends are oriented as indicated above the battery chamber. ■ 2. The battery nearest the outside edge of the camera has its positive end on top and the battery furthest from the outside edge has its negative end on top. Close the battery/memory card cover.
GETTING READY TO TAKE PICTURES 11 SET THE DATE AND TIME When you transfer a photo to a computer or print a photo, the time and date the photo was taken are shown. To set the display style: 1. Rotate the Mode dial to Set Up. 2. Press the On/Off button to turn the camera on. 3. Use the Down button the Display button.
12 VISIONEER MX 200 DIGITAL CAMERA USER’S GUIDE 4. Select the Style option and then press the Display button. 5. Use the Up or Down buttons to select the Month/Day or Day/Month display style. 6. Press the Display button to save your selection. To set the date and time: 1. On the Set Up menu, select Date/Time, and then press the Display button. 2. Use the Down Display button.
GETTING READY TO TAKE PICTURES 3. Use the Up or Down buttons to set the correct hour (using a 24-hour clock). When finished, press the Copy button to move to the minutes area. 4. Repeat the procedure in Step 3 to set the minutes, year, month, and day. 5. When finished, press the Display button. Note: To exit at any time without saving changes, press the Delete button. SET THE LANGUAGE Your camera can display text and messages in English, Spanish, German, French, Italian, and Japanese.
14 VISIONEER MX 200 DIGITAL CAMERA USER’S GUIDE 2. If the camera is not already on, press the On/Off button. 3. Use the Down button to select Language, and then press the Display button. 4. Use the Up and Down buttons to select a language, and then press the Display button to save the change.
TAKING PICTURES 15 TAKING PICTURES You are now ready to take a picture. For basic point-and-click picture taking, use the Snapshot mode described below. To customize settings or use different modes, see “Exploring Your Camera’s Features” on page 18. To take a picture: 1. Press the On/Off button to turn the camera on. ■ After a short pause, the LED stops flashing. The camera is ready to take a picture. 2. Rotate the Mode dial to Snapshot. 3.
16 VISIONEER MX 200 DIGITAL CAMERA USER’S GUIDE REVIEWING AND DELETING PICTURES After you take a picture, you can immediately review the results. You can then keep or discard the picture. To review pictures: 1. Rotate the Mode dial to Playback 2. Press the Up and Down pictures you’ve taken. buttons to scroll through the 3. Press the Zoom In button to see more details of a picture. ■ and turn the camera on. The default zoom setting is x1.0.
REVIEWING AND DELETING PICTURES To delete a picture: 1. While in Playback mode, press the Up and Down buttons to scroll and find the photo to delete. 2. Press the Delete button 3. Press the Display button to delete the photo from memory. to select the photo for deletion.
18 VISIONEER MX 200 DIGITAL CAMERA USER’S GUIDE EXPLORING YOUR CAMERA’S FEATURES You now know how to take pictures using the snapshot and review features of your camera. There are many other features available to customize and enhance your picture-taking experience. These features are accessed using the Mode dial. This section describes the features of the six modes, and the function of the buttons in each mode. SNAPSHOT MODE As you have seen, Snapshot mode is used for taking pictures.
EXPLORING YOUR CAMERA’S FEATURES 19 Flash: Cycles through settings for the flash. ■ Auto: The camera determines when the flash is needed. ■ On: ■ Red-eye reduction: Reduces the appearance of red-eye in photos caused by flash reflection off of the subject’s eyes. The camera flashes quickly before the picture is taken to reduce the occurrence of red-eye. ■ Off: The flash is always on, whether needed or not. The flash is off, whether needed or not.
20 VISIONEER MX 200 DIGITAL CAMERA USER’S GUIDE VIDEO MODE Video mode allows you to record 60-second, non-audio movies. Note: The length of time available for recording a video clip is dependent on the available memory on the SmartMedia card (or the internal memory). To record a video clip: 1. Turn the Mode dial to Video. 2. Press the Shutter button to begin recording. ■ By default the camera records for 60 seconds and then terminates the recording.
EXPLORING YOUR CAMERA’S FEATURES 21 Down Button: Decreases the camera lens’ exposure value, which allows less light in the lens. Zoom In: Narrows the field framed by the camera’s lens, from x1.0 to x2.0. Zoom Out: Widens the field framed by the camera’s lens, from x2.0 to x1.0. PRESET MODE PRE SET Preset mode provides five preset settings that are optimized for taking specific types of pictures as described below.
22 VISIONEER MX 200 DIGITAL CAMERA USER’S GUIDE Self-Timer: Takes a picture after a 10-second delay. Macro: Optimized for taking close-up shots of objects or people within one foot or less of the camera. The red-eye reduction feature is turned on. PLAYBACK MODE Playback mode is used to view the photos or video clips stored in the internal memory or on the SmartMedia card. To review photos and video clips: 1. Turn the Mode dial to Playback.
EXPLORING YOUR CAMERA’S FEATURES 23 Zoom In: Narrows the field framed by LCD, from x1.0 to x4.0. The default zoom setting is x1.0. Each time you press the Zoom In button, the zoom ration increases as follows: x1.5, x2.5, x3.0, x3.5, x4.0. Zoom Out: Widens the field framed by the LCD, from x4.0 to x1.0. Thumbnail: Displays up to nine images at once when pressed while the zoom ratio is at the default, x1. ■ Press the Up and Down buttons to scroll through the thumbnails.
24 VISIONEER MX 200 DIGITAL CAMERA USER’S GUIDE SET UP MODE Set Up mode is used to configure your camera. When you turn the Mode dial to Set Up, the following menu displays on the LCD. Each menu option is described below. Note: To exit a Set Up mode selection without saving changes, press the Delete button. Delete All: This option is used to delete all images from the internal memory or the SmartMedia card. To determine, or change, the current memory type, refer to “Memory Type” on page 29. 1.
EXPLORING YOUR CAMERA’S FEATURES 25 1. From the Set Up menu, press the Up or Down buttons to select Format, and then press the Display button. 2. On the Format screen, press the Up or Down buttons to select No or Yes, and then press the Display button. Quality: This option is used to adjust the quality and resolution of your pictures. The higher the quality, the clearer your pictures. However, higher quality images are larger, meaning that you cannot store as many in memory.
26 VISIONEER MX 200 DIGITAL CAMERA USER’S GUIDE 1. From the Set Up menu, press the Up or Down buttons to select Quality, and then press the Display button. 2. On the Quality screen, press the Up or Down buttons to select the desired picture quality, and then press the Display button. Buzzer: This option is used to set the camera to beep when you push its buttons or rotate the Mode dial. 1. From the Set Up menu, press the Up or Down buttons to select Buzzer, and then press the Display button. 2.
EXPLORING YOUR CAMERA’S FEATURES 27 DPOF: This option (Digital Printer Order Format) allows you to print photos directly to a printer that supports this protocol. For more details, see“Printing Directly to a Printer” on page 50. 1. From the Set Up menu, press the Up or Down to select DPOF, and then press the Display button. buttons 2. On the DPOF screen, press the Up or Down buttons to set print options for selected images or all images on the storage device.
28 VISIONEER MX 200 DIGITAL CAMERA USER’S GUIDE ■ Press the Display button to save the settings. If you chose the All Images option: ■ Press the Copy button to highlight Copies. ■ Press the Up and Down buttons to select the number of copies of the image to print. ■ Press the Copy ■ Press the Up and Down buttons to select Yes or No to indicate whether or not to print the date on the photos. ■ Press the Display button to save the settings. The settings apply to all of the images.
EXPLORING YOUR CAMERA’S FEATURES 29 Date/Time: This option is used to set the time and date associated with each photo that you take. See “Set the Date and Time” on page 11 for details. Memory Type: This option is used to set where photos are stored; in the internal memory or on the SmartMedia card. 1. From the Set Up menu, press the Up or Down buttons to select Memory Type, and then press the Display button. 2.
30 VISIONEER MX 200 DIGITAL CAMERA USER’S GUIDE Video Out: This option is used when you are connecting your camera to a television set using the video cable. You must choose a transmission format that is compatible with your television if you want to record the transmitted video images with a VCR. 1. From the Set Up menu, press the Up or Down buttons to select Video Out, and then press the Display button. 2.
EXPLORING YOUR CAMERA’S FEATURES 31 PC MODE PC mode is used to allow your camera to be used as a PC camera. After connecting your camera to your PC via the USB port, you can use your camera to create videos and snapshots directly on your computer. For details, see “Connecting to a Computer” on page 36 and “Using Your Camera as a PC Camera” on page 45. To use your camera as a PC camera: 1. Turn the Mode dial to PC. 2. Use the supplied USB cable to connect the camera to your PC.
32 VISIONEER MX 200 DIGITAL CAMERA USER’S GUIDE THE LCD When your camera is in any mode, other than Set Up and PC, current camera settings are displayed as icons on the LCD. This section describes each display area and the associated icons.
THE LCD 33 FLASH SETTING Indicates the current setting for use of the camera’s flash. If there is no flash setting indicated, the camera is set to automatically determine whether or not the flash is needed. Flash Off: The flash is turned off, whether needed or not. Red-Eye Reduction: Reduces the appearance of red-eye in photos caused by flash reflection off of the subject’s eyes. Flash On: The flash is always on, whether needed or not. PRESET MODE Indicates the current Preset mode setting, if any.
34 VISIONEER MX 200 DIGITAL CAMERA USER’S GUIDE WHITE BALANCE SETTING Indicates the current White Balance (WB) setting. If there is no setting indicated, the camera is set to automatically determine the appropriate white balance. Daylight: For taking pictures in bright daylight, to reduce the effect of whitewashed pictures. Shade: For taking pictures in the shade, or if picture is dark. Incandescent: For taking pictures under incandescent light. Fluorescent: For taking pictures under fluorescent light.
THE LCD 35 PICTURES REMAINING Indicates the number of pictures remaining on the selected memory (internal or external). The number of remaining pictures is based on the amount of available space on the memory and the current quality/resolution setting. QUALITY Indicates the current selection for picture quality and resolution. See “Quality” on page 25 for setup details. DATE / TIME Indicates the current date and time, as defined in the Set Up area of your camera.
36 VISIONEER MX 200 DIGITAL CAMERA USER’S GUIDE CONNECTING TO A COMPUTER This section describes the procedures to install software and connect your camera to your computer. You can then copy photos to your computer or use it as a PC camera. COPYING PHOTOS TO A COMPUTER Your digital camera stores photos as digital data, rather than on film. This means you can copy your photos to a computer for storage, viewing, printing, and distribution.
CONNECTING TO A COMPUTER 37 INSTALL SOFTWARE ON YOUR COMPUTER Before connecting your camera, you must install software on your computer. This is a one-time procedure that installs the TWAIN drivers and utility program that allow your camera to communicate with your computer via the USB cable. To install the software: 1. Insert the installation CD that came with your camera into your computer’s CD-ROM drive. The CD automatically starts.
38 VISIONEER MX 200 DIGITAL CAMERA USER’S GUIDE 2. From the main menu screen, click Install Visioneer Camera. 3. On the Choose Setup Language screen, select the desired language from the drop-down list, and then click OK. 4. Follow the installation instructions as described below: 5. ■ On the Welcome screen, click Next. ■ On the Select Components screen, click Next. ■ On the Microsoft DirectX 8.1 Setup screen, read the license agreement. If you accept the terms, click Yes.
CONNECTING TO A COMPUTER 39 CONNECT TO YOUR COMPUTER THE FIRST TIME The first time you connect your camera to your computer, the computer recognizes the camera as a new piece of hardware and leads you through the installation. This is a one-time procedure. To install your camera to copy photos: 1. Connect the small connector of the USB cable to the USB port on the camera. See “Back View” on page 6 for the position of the USB port on the camera. 2.
40 VISIONEER MX 200 DIGITAL CAMERA USER’S GUIDE Note: If your computer is running the Windows XP operating system, you may see a screen indicating that the camera has not passed Windows Logo testing. If this screen appears, click Continue Anyway. The function of your camera is not affected. 6. When installation is finished, turn off the camera. To install your camera for use as a PC camera: 1. With the camera connected to your PC, set the camera’s Mode dial to PC. 2. Turn on the camera. 3.
COPYING PHOTOS TO YOUR COMPUTER 41 COPYING PHOTOS TO YOUR COMPUTER When connected to your computer, your digital camera behaves like any other drive attached to your computer. There are two ways to copy photos from your camera to your computer: using Windows Explorer or using the Visioneer Digital Camera Utility software. The Visioneer Digital Camera Utility contains more options for copying and deleting photos.
42 VISIONEER MX 200 DIGITAL CAMERA USER’S GUIDE To copy photos using Windows Explorer: 1. On your computer, open Windows Explorer. The contents of your computer is displayed, including all drives. The drive called Removable Disk represents your camera. 2. In Windows Explorer, select the Removable Disk drive. 3. Double-click to open the DCIM folder. The photos in the camera’s memory are grouped in folders whose names are based on the date the photos were taken. 4.
COPYING PHOTOS TO YOUR COMPUTER 43 To copy photos using the Visioneer Digital Camera Utility: 1. On your computer desktop, click Start, point to Programs, point to Visioneer Digital Camera Utility, and then click Visioneer Digital Camera Utility. Help Upload Select All/ Deselect All Enlargement Setting Delete Exit Computer folders Camera images The Visioneer Digital Camera Utility opens in Digital Camera mode.
44 VISIONEER MX 200 DIGITAL CAMERA USER’S GUIDE ■ To select all of the images, click the Select All/Deselect All button. 3. To delete photos from you camera’s memory, select the photos you want to delete, click the Delete button, and then click Yes in the message box to confirm the deletion. 4. To set the size of the image during export, click the Enlargement Setting button. ■ 5. Select Original to keep the original size or Enlargement to create a larger image.
USING YOUR CAMERA AS A PC CAMERA 45 USING YOUR CAMERA AS A PC CAMERA With your camera in PC mode, you can use it with the supplied Visioneer Digital Camera Utility software to create videos and snapshots directly on your computer. You can also use other commercially available video capture software and real-time video conferencing software such as Microsoft NetMeetingTM.
46 VISIONEER MX 200 DIGITAL CAMERA USER’S GUIDE Note: To use the Visioneer Digital Camera Utility with your camera in PC mode, your computer monitor’s display must be set to 24 bit or higher color depth. Right-click your desktop and select Properties. On the Display Properties window, click the Settings tab. Set the Colors value to True Color (24 bit) or higher. To record a video clip: 1.
USING YOUR CAMERA AS A PC CAMERA 47 The Visioneer Digital Camera Utility opens in Video mode. The Video Viewfinder displays the view through the camera’s viewfinder. 2. To start recording a video, click the Record button. 3. On the Capture Setting dialog box, set a time limit and destination for the saved video. 4. Click OK on the dialog box to start recording. 5. When the time limit is reached, or you press the Record button again, recording is stopped. Click OK to acknowledge the message box.
48 VISIONEER MX 200 DIGITAL CAMERA USER’S GUIDE To take a snapshot: 1. Open the Visioneer Digital Camera Utility. 2. Click the Snapshot button to take a picture of the view in the Video Viewfinder. 3. On the Save Picture to File dialog box, enter a file name, select a destination, and select a file format (JPEG, BMP, or TIF) for the picture. 4. Click Save on the dialog box to save the snapshot. 5. When finished, click Exit to close the Visioneer Digital Camera Utility and then turn off your camera.
CONNECTING TO A TELEVISION 49 CONNECTING TO A TELEVISION You can connect your camera to a television and view the camera’s LCD display on the television screen. You can change modes using the Mode dial and perform camera functions including Snapshot, Playback, Set Up, and Video. To connect your camera to a television: 1. Using the supplied video cable, connect the small, black end of the cable to the Video Out jack on your camera. 2.
50 VISIONEER MX 200 DIGITAL CAMERA USER’S GUIDE PRINTING DIRECTLY TO A PRINTER Two methods are available to print pictures from your camera to a printer that supports the DPOF (Digital Print Order Format). DIRECT CONNECTION FROM YOUR CAMERA TO THE PRINTER The user guide supplied with the printer will include instructions for connecting and printing directly from a camera. Note: The printer must support DPOF, as well as connections to cameras from different manufacturers.
TROUBLESHOOTING 51 TROUBLESHOOTING If you are having problems using your camera, refer to the troubleshooting procedures in this section. If you are still having difficulties, refer to the technical support section in this guide on page 51. Also, visit our web site at www.visioneer.com for additional support information. Problem: The camera has no power. Possible Cause Solution The camera is turned off. Press the On/Off button to turn the camera on. The batteries are discharged.
52 VISIONEER MX 200 DIGITAL CAMERA USER’S GUIDE Problem: The flash doesn’t work. Possible Cause Solution The flash is not turned on. Ensure that the flash is set to the Automatic or Always On options. Refer to page 33. The batteries are weak and the flash is unable to recharge. Turn the camera off and wait a few seconds before turning it back on. If this doesn’t work, replace the batteries. Problem: When turned on, the LED flashes green, red, orange, and green. Then the camera crashes.
US AND CANADA TECHNICAL SUPPORT 53 US AND CANADA TECHNICAL SUPPORT Support on the Web www.visioneer.com Support by Fax (541) 884-8474 Support by Telephone (541) 884-5548 (8:00 am - 5:00 pm Pacific Time, Monday-Friday) Long distance charges may apply Express Telephone Support (900) 776-5724 (8:00 am - 5:00 pm Pacific Time, Monday-Friday) (Nominal per-minute fee) INTERNATIONAL TECHNICAL SUPPORT Visioneer provides technical support to all registered users in English and German.
54 VISIONEER MX 200 DIGITAL CAMERA USER’S GUIDE Country Telephone Monday - Friday UK 0870 161 3003 Germany 0180 5 103 003 Rest of Europe 49 1805 440466 Visit www.visioneer-europe.com for more information Important: Contact information is subject to change. Please visit our Web site at www.visioneer.com for the latest details.
MX 200 DIGITAL CAMERA SPECIFICATIONS 55 MX 200 DIGITAL CAMERA SPECIFICATIONS Sensor 2 megapixel Resolution output 3 megapixel Advanced Stepless Digital Zoom (Superior ADZ) 2x ADZtm for video clip capture 3x ADZ for still image capture 3x ADZ for picture displayed on LCD TFT color LCD 1.5 inch 280x220, 61K pixel Memory Internal: 8MB Flash External: SmartMedia memory card Video clip Up to 60 seconds USB interface USB 1.
56 VISIONEER MX 200 DIGITAL CAMERA USER’S GUIDE Viewfinder Optical type: reverse Galileo image View ratio: 80% Still image capture 3M, 2048 x 1536, Super 2M, 1600 x 1200, Fine 2M, 1600 x 1200, Normal XGA, 800 x 600, Fine XGA, 800 x 600, Normal Video clip mode 320 x 240, 15fps, AVI format, 60 sec. max.
INDEX 57 INDEX B batteries installing 10 safety 2 status 35 button Copy 23 Delete 23 Display 18, 22 Down 18, 21, 22 Flash 19 Thumbnail 16, 23 Up 18, 20, 22 White Balance 19 Zoom In 19, 21, 23 Zoom Out 19, 21, 23 buzzer 26 C camera back view 6 bottom view 8 components 5 connecting to a computer 39, 41 connecting to a television 49 copying photos from 36 features 1 front view 5 parts 4 safety information 2 troubleshooting 51 using as a PC camera 36, 45 components back 6 bottom 8 front 5 computer connecting
INDEX 58 in Snapshot mode 18 in Video mode 20 on LCD 35 F features 1, 18 flash safety 3 settings 19 Flash button 19 flash setting on LCD 33 format 24 L landscape 21 language 29 setting 13 LCD battery status 35 date and time 35 display description 32 exposure value 35 flash setting 33 memory in use setting 34 pictures remaining 35 preset mode setting 33 quality setting 35 white balance setting 34 zoom ratio setting 34 M macro 22 memory copying photos from external to internal 23 copying photos from inter
INDEX 59 on LCD 33 options 21 portrait option 21 self-timer option 22 Printing to a printer 50 Q quality 25 on LCD 35 R reviewing pictures 16 S safety information 2 self-timer 22 Set Up mode 24 buzzer 26 date and time 29 delete all 24 DPOF 27 format 24 language 30 memory type 29 quality 25 video out 29 Snapshot mode buttons 18 software installation 37 specifications 55 support technical 53 T taking pictures basic steps 15 getting ready 9 technical support 53 television connecting camera to 49 Set Up mod
INDEX 60 Z Zoom In button 19, 21, 23 Zoom Out button 19, 21, 23 zoom ratio on LCD 34