User`s guide

16 VISIONEER PATRIOT 780 SCANNER USER’S GUIDE
STEP 3: CONNECT THE SCANNER
To connect the power:
1. Plug the power supply into the power port on the scanner.
2. Plug the power cord into the power supply then into a wall outlet.
To connect to the computer:
1. Remove any protective tape from the USB cable.
2. Plug the USB cable into the USB port on the scanner then into a USB
port on the computer. (Check your computer’s manual for USB port
locations.)
If you use a USB hub, it must have its own power supply already plugged
into an electrical outlet.
Note: Only use the power supply (HEG42-240200-7L made by HiTron)
included with your scanner. Connecting any other type of power supply may
damage your scanner, and will void its warranty.