User Manual

SCANNING AN ITEM 10
To scan an item:
1. Open the scanner cover, place the item you want to scan face down
aligned at the lower left corner of the scanner glass, and close the
cover.
2. If you are using the MGI PhotoSuite III SE application to scan,
click the Scan button on the PhotoSuite window. See the figure on
page 9.
If you are using another application to scan with your scanner,
please see the user’s guide that you received with that application for
the steps to scan.
The Scan Manager appears.
3. From the list of Scanner Settings labeled “Scan Page For,” select the
most appropriate setting for the item you’re scanning. In the
example above, the selected setting is “Color Document-Faster.”