User Manual

VISIONEER
®
ROADWARRIOR 4D WELCOME
10 SCANNER USER’S GUIDE
UNPACK THE SCANNER
1. Remove the blue plastic strip from around the scanner.
2. Remove the clear plastic film from the top of the scanner.
3. Place your thumbs on either side of the paper feed slot, underneath the lid of the scanner. Hold the scanner
sides firmly and pull the scanner lid up to release it from the body of the scanner.
Use both hands to open the scanner, the lid is held down with locking arms on both sides of the paper feed
slot. If you open only one side, you may damage the scanner lid.
4. Remove the foam strip(s) from inside the scanner.