User Manual

VISIONEER
®
ROADWARRIOR 4D LOADING DOCUMENTS TO SCAN
24 SCANNER USER’S GUIDE
■ Coated paper or photographs where the coating can flake off during scanning and leave residue in the
scanner.
■ Extremely smooth, shiny, or highly textured paper may cause the paper feed rollers to slip across the page
and cause the scanner to report a paper jam.
■ Carbonless copy paper may tear while being fed through the scanner and the pressure of the rollers may
leave streaks on the page. The chemical coating on this paper will rub off on the rollers during the scan
process, increasing the frequency of miss-feeds and paper jams.
■ Partially transparent paper such as tracing paper as any images from the opposite side of the page or black
background will appear in the scanned images.
■ Thermal or photosensitive paper.
UNSUPPORTED DOCUMENT TYPES
Do not scan the following types of documents as they may cause damage to the scanner.
■ Items outside of the specified supported sizes, thickness, and weight defined in this document.
■ Non-rectangular or irregularly shaped paper will cause the scanner to detect and report document skew
errors or paper jams.
■ Carbon paper that will leave residue in the scanner and on the rollers that will transfer to the next set of
documents scanned.
■ Documents with hard items attached such as paper clips, binder clips, and staples.
■ Documents with wet ink or white-out.
■ Overhead projector sheets, plastic film, camera film, and any other type of transparent or partially
transparent plastic item.
■ Documents that have been glued together.
■ Cloth or metallic sheets.
SCAN USING AUTOLAUNCH™
Always remove any staples or paper clips from documents before inserting them into the scanner. Staples and
paper clips can jam the feed mechanism and scratch the internal components. Also remove any labels, stickers, or
Post-It™ notes that may come off during the scanning process and get stuck in the scanner. Misuse as described
here will void your scanner’s warranty.