User Manual

Xerox
®
DocuMate
®
3125 Scanning from TWAIN and WIA
7-107 User’s Guide
Locked Scanning Interface
If you see this locked version of the scanner’s interface you will be able to select a predefined
scanning profile from the Presets list, and then click the Scan button to start scanning.
You can also click on the Preview button to open the preview dialogue for you to scan a preview
image and set custom scan regions.
Note: You can lock or unlock the scanner’s interface from the driver configuration options for
your scanner. The instructions for changing this setting are in the Driver Settings section of this
guide. If you are unable to change this setting the option may have been set by your system
administrator. Please contact your system administrator for more information.
Using the Preview Window
Clicking the Preview button will display the preview window for the scanner interface. Use the
preview option if you want to scan and display a sample image that reflects the current settings
in the main interface. After the preview is displayed, you can then adjust the settings in the
main interface until you are happy with how the sample image looks. The preview window is
also where you can define custom scan regions. Please refer to Scan Regions for instructions on
creating and scanning custom regions.
To use the preview window:
1. Select the initial scan settings you want to use for the preview image and scanning.
If you want to modify the settings for a particular preset, make sure you select that preset
before continuing.
2. Click the Preview button to open the preview window.
If there is a page in the scanner, the scanner will scan and display a sample image in the
preview window. If you do not have a page in the scanner when you click Preview, the
preview window will open and display an empty scan area. You will need to place a page in
the scanner and click Get preview to scan and display a sample image.