User Manual

Xerox
®
DocuMate
®
3125 Scanning from TWAIN and WIA
7-129 User’s Guide
Advanced Panel Options
The options in this panel may also appear in the Main panel, but with additional settings for
you to fine-tune the feature you've selected. Select the Advanced source configuration mode
to show this panel.
Skip Blank Originals
Select this option to have the scanner detect if a blank page has been fed through the scanner,
and remove it from the final file. Typically you might use this option when scanning a stack of
two-sided pages which have a number of blank sides.
• Blank threshold—you can use the Threshold slider to fine tune the sensitivity of the blank
image detection. The results will depend on the scan settings and the types of documents
being scanned. In general leave the threshold level at the default setting if you are
scanning good-quality documents printed on standard 20lb printer paper. Try lowering the
sensitivity level if your documents contain light colored text or drawings so those pages are
not detected as blank. Raise the sensitivity level if you are scanning double-sided light-
weight paper where images from the opposite side of the page may appear in the image of
the blank side.
Clean Up Edges
Select this option to remove any thin lines from around the edges of the final scan. This option
will fill the margins of the image with the detected edge color. When you select this option, the
Width input field will automatically enable for you to input the size of the area you want to
have filled with the background color. You can specify a fill size between approximately 0.04 to
0.39 inches (1 mm to 10 mm).
Automatic Image Cropping
Depending on the scanner model and installed software, there may be more than one auto
cropping option in the interface.