User Manual
Table Of Contents
- Table of Contents
- Safety
- Welcome
- Scanner Setup
- Installation
- Loading Documents to Scan
- Scanning and Configuring One Touch
- Default One Touch Settings
- Scan from the One Touch Button Panel
- Changing the Button Settings
- Selecting Options for One Touch
- Scan Configurations
- File Formats
- Configure Before Scan
- Open Scanned Document(s)
- Transfer to Storage
- Burn to CD-ROM
- Printer or Fax
- PaperPort
- SharePoint
- FTP Transfer
- SMTP
- Email Applications
- Text Editors
- Still Image Client
- Image Editors
- PDF Applications
- Send to Application
- Scanning to Multiple Destinations
- Scanning with Job Separation
- Scanning with Optical Character Recognition (OCR)
- Selecting One Touch OmniPage OCR Options
- OneTouch with Visioneer Acuity Technology
- Hardware Properties
- Scanning from TWAIN and WIA
- Scanning from ISIS
- Maintenance
- Regulatory Information
- Compliance Information
- Index
Xerox
®
DocuMate
®
3125 Maintenance
9-157 User’s Guide
3. Close the scanner when you’re finished.
Replacing the Roller Assembly
After extended use, the feed roller may wear out. It is a user-replaceable
part and can be reordered.
Frequent paper jams are a symptom of a worn roller assembly. A worn roller
can cause documents to feed in skewed at an angle, or multiple pages to
feed at the same time. A worn roller should be replaced to avoid damage to the scanner’s
internal parts. Before replacing the roller you should clean it as excessive dust on the roller will
make it appear worn and smooth. You cannot properly diagnose a worn roller until you have
cleaned it.
1. Open the Automatic Document Feeder cover.