User Manual
Table Of Contents
- Table of Contents
- Safety
- Welcome
- Scanner Setup
- Installation
- Loading Documents to Scan
- Scanning and Configuring One Touch
- Default One Touch Settings
- Scan from the One Touch Button Panel
- Changing the Button Settings
- Selecting Options for One Touch
- Scan Configurations
- File Formats
- Configure Before Scan
- Open Scanned Document(s)
- Transfer to Storage
- Burn to CD-ROM
- Printer or Fax
- PaperPort
- SharePoint
- FTP Transfer
- SMTP
- Email Applications
- Text Editors
- Still Image Client
- Image Editors
- PDF Applications
- Send to Application
- Scanning to Multiple Destinations
- Scanning with Job Separation
- Scanning with Optical Character Recognition (OCR)
- Selecting One Touch OmniPage OCR Options
- OneTouch with Visioneer Acuity Technology
- Hardware Properties
- Scanning from TWAIN and WIA
- Scanning from ISIS
- Maintenance
- Regulatory Information
- Compliance Information
- Index
Scanner Setup Xerox
®
DocuMate
®
3125
User’s Guide 3-10
4. Pull the output tray down from the scanner body. It will snap in place when it is down all the
way. Make sure the bottom of the tray is down all the way before scanning. If the tray isn’t
fully seated in position, paper feeding from the input tray may jam in the scanner.
Connect the Scanner Power Cord
Note: Only use the power supply (HEG42-240200-7L made by HiTron or DA-24C24 made by
APD) included with your scanner. Connecting any other type of power supply may damage your
scanner, and will void its warranty.
1. Plug the power supply into the power port on the scanner.
2. Plug the power cord into the power supply and into a wall outlet.