User Manual

Scanning and Configuring One Touch Xerox
®
DocuMate
®
3125
User’s Guide 6-38
Enable redaction—select this option to enable redaction when scanning. You might use this
option if you want to remove a logo or image that appears on each page that you are scanning.
You can choose what color to fill in the redacted area in the scanned image, and set multiple
areas. If you are scanning in Duplex mode, you can specify the area separately for the front and
back side of the pages.
Click Add to add a line item to the area list in this window. You can redact multiple areas from
the scanned image, click the Add button again to continue adding line items to the list. Select
an item in the list then click the Remove button to remove the specified redaction area from the
list.
Click one time on the default value, 0.00 in each field, to enable the control box for you to input
the start position and redaction area size. The units of measurement is displayed on the lower-
right corner next to the Paper size field.
• From left—input the upper-left corner start position measured from the left-side of the
page.
• From top—input the upper-left corner start position measured from the top of the page.
• Width—input the width of the area to be removed.
• Height—input the height of the area to be removed.
Color—this color field shows the selected fill color for the redacted area(s). When the software
removes the area you specify, it fills the area with the color you have selected here. To change
the color, click the artist palette button to open the Windows color palette. Select the color you
want then click on OK. The color you selected will now display in the Color field on the
Redaction Settings tab.