User Manual

Xerox
®
DocuMate
®
3125 Scanning and Configuring One Touch
6-39 User’s Guide
Preview—this color field shows the actual color that will fill the redaction area in the final
scanned image. When scanning in color, the Preview field will match the Color field. When
scanning in Grayscale, the preview field will show the gray version of the color you selected, and
that color will be in the final scanned image. When scanning in Black&White, the preview field
will display black or white depending on the darkness of the color you selected, and the final
image will have the redacted area(s) be black or white.
Technical Note
The options on the Page Settings tab will affect the redaction options as described below:
• On the Page Settings tab, click the name inches or mm to toggle between the two units of
measurement. When you click back on the Redaction Settings tab, the lower-right corner
displays the Paper size in the units of measurement you selected.
• Make sure the page size selected on the Page Settings tab is correct for the documents you
are scanning, otherwise the redaction may not occur in the correct area.
•If Color dropout is selected, redaction occurs after the color specified is removed from the
image.
For example, if you selected Red as the color dropout, but then specify red for the redaction
region, the final image will have the redacted region filled with gray when scanning
Grayscale, or black or white when scanning in Black&White.
Color
scanning
Grayscale
scanning
Black&White
scanning
Click the name to
toggle between
inches and
millimeters.