User Manual

Scanning and Configuring One Touch Xerox
®
DocuMate
®
3125
User’s Guide 6-72
Still Image Client
If you want to specify an application to use for scanning at the start of the process, you can use
event forwarding.
Supported file formats—you cannot select a file format when scanning to the Still Image
Client as the destination application is not selected until after you start scanning.
Destination type—the Still Image Client destination is classified as an “Event Forward Link”. To
make it available in the destination list, you must select STI event forwarding on the Options
tab in the One Touch Properties Window.
Please note that if you have turned on the option to scan to multiple destinations, the Still
Image Client destination cannot be selected. Please click on the Options tab and deselect
Enable scanning to multiple destinations to proceed with scanning to this destination.
1. Open the One Touch Properties window, and select Still Image Client as the Destination
Application.
2. Choose a Scan Configuration and click OK.
3. Start scanning using the button you selected for event forwarding.