User Manual

Xerox
®
DocuMate
®
3125 Scanning and Configuring One Touch
6-73 User’s Guide
4. A dialog box opens for you to select the application to use for scanning. Select the
application you want in the box and click OK.
Now the application you selected opens and you can continue scanning using that
application’s interface.
Technical Note
If the scanner scans and sends an image to an application without prompting you to choose an
application to run, the control panel options for your scanner’s events are automatically set to
run a specific program when an event is initiated. Follow these steps to change the events
setting for your scanner.
1. Open the Windows Control Panel.
2. Open the Scanners and Cameras group.
When the Control Panel is in Classic View, the Scanners and Cameras group will be in the
list.
When the Control Panel is in Category View (Windows XP), or Home View (Windows Vista, 7
and 8), the Scanners and Cameras group will be located under either of the following main
groups:
– Windows XP—Printers and Other Hardware
– Windows Vista, 7 and 8—Hardware and Sound
3. Open the scanner properties window.
– Windows XP—click on the scanner icon and then click on the View device properties
link on the left side of the window.
– Windows Vista, 7 and 8—click on the scanner icon and then click on the Properties
button.
4. Click on the Events tab.
5. Select the option Prompt for which program to run to be prompted when scanning to Still
Image Client. Alternatively, select Start this program then choose an application from the
list to have that application start each time you scan to Still Image Client.
6. Click on OK when you are done making changes to this window.
7. Now when you scan with Event Forwarding you will either be prompted to choose an
application, or the default application you selected will open.