User Manual

Xerox
®
DocuMate
®
3125 Scanning and Configuring One Touch
6-81 User’s Guide
To configure a destination application for the Send to Application link:
1. Click Browse to open the Windows file browser and navigate to the location of the
application’s executable (*.exe) file.
In most cases, the application’s directory is located in the programs directory on the C:\
drive. Because you can select any executable file, make sure you select an application that
can receive image or text files.
2. Select the application’s *.exe file then click on Open.
The application’s *.exe file path will now show in the Application path field.
3. Click on OK to close the window.
For basic scanning, you do not need to adjust any of the other settings in this window. The
default settings will work with most applications. The advanced settings are described
below.
4. Select a file format and scan configuration in the One Touch Properties window.
If you select a text file format, the scanned image is converted into editable text before
being sent to your selected application.
5. Click on OK to close One Touch.
6. Put the document(s) in the scanner and start scanning with the button you set to use the
Send to Application destination.
7. The scanner starts scanning and, when finished, sends the scanned file to the application
you selected.
Technical note
• After configuring this link, you may need to click Refresh in the One Touch Properties
window to show the correct application icon in the Select destination list.
Send to Application One Touch Link
Properties window
Send to Application Scan Configuration
Properties window