User Manual

Scanning and Configuring One Touch Xerox
®
DocuMate
®
3125
User’s Guide 6-84
4. If any of the destinations you select have global configuration properties, the Properties
button at the bottom of the Selected destinations list will be enabled for you to configure
the destination options. Click on the Properties button to open the One Touch Link
Properties window to configure the destinations.
Each destination that has global properties will be represented by its configuration tab in
the One Touch Link Properties window. Please refer to the destination instructions, as
described in the previous section(s), for configuring destination specific options.
Click on OK when you are done making changes in this window.
5. Select the file format you want for the scanned image in the Select format panel.
You can only scan as one file format at a time, so all selected destinations must have a
common file type. As you select destinations, destinations that do not have a file type in
common with the one you selected, will automatically disable.
For example, if you scan to a printer and to email, only the BMP file format will be available
as printers can only receive an uncompressed image format. All other image formats and
all text formats will be disabled until you deselect the printer.