User Manual

Scanning and Configuring One Touch Xerox
®
DocuMate
®
3125
User’s Guide 6-86
2. Select the Destination Application, File Format, and Scan Configuration applicable to your
scanning batch.
Make sure the option Create single image files is not selected. If this option is selected, the
job separation features on the Options tab will be disabled.
3. Click on the Options tab in the One Touch Properties window.
4. Click on the down arrow next to the Select Button list to select the button you want to
modify.
Note that the options in this window are specific to each One Touch button.
5. Click on the option Use job separator when scanning multiple pages.
6. Select one of the two job separation options:
When a blank page is detected—a new file will be created after a blank page is fed
through the scanner. The blank page is discarded from the scanned image and the new file
starts with the next page in the document stack. Place a blank page, in the document you
are scanning, at each place where you want a new file created when scanning is complete.
When you are scanning in Duplex mode, both sides of the page must be blank for this job
separation option to work.