Installation Instructions

ManualsBrandsVisiongrills ManualsGrillKamado Signature Series Rendezvous-Malibu

ENGLISH

SET UP

Step 1: Cart & Grill Assembly

Model #s RL-K18F1M4 / RL-W19D1L5 / RL-K19D1L5 /Malibu

• Unpack cabinet cart from

packaging. (Step 1a)

• Wheels, door and posts are

preassembled.

SIGNATURE SERIES

RENDEZVOUS

STEP 1a

STEP 1b

•

Insert back side poles over back

posts of cart (Step 1b). Make

sure felt stoppers are facing

inward and shelf brackets are

facing outward.

• Line up holes in back side pole

with spring loaded pin on back

post and push down until they

snap into place.

• Take all parts out of grill before lifting. The Kamado grill

is heavy and will require two people to lift and guide

onto cart (Step 1c).

STEP 1c

Parts for Assembly:

2 pcs. - Back Side Poles

2 pcs. - Front Side Poles

2 pcs. - Side Shelves

1 pc. - Pre-Assembled

Cart

1 pc. - Charcoal Grate

1 pc. - Fire Bowl

1 pc. - Wood Handle

1 pc. - Top Vent

Grate Lifting Tool

1 pc. - Kamado Grill

Cooking Stone &

Bracket

Grill Light

• Be sure ProZone

is centered between

two front posts and

the back of the grill is

resting against the two

back leg felt stoppers.

1 pc. -

Top Flip Grate

1 pc. -

Cast Iron Grate

1 pc. -

Bottom Flip Grate

*Malibu Only

Tools Included:

T-Handle Wrench Flat WrenchBox Wrench:

For shelves assembly

Summary of content (4 pages)

PAGE 1
Parts for Assembly: A SET UP ENGLISH 1 pc. - Pre-Assembled Cart SIGNATURE SERIES RENDEZVOUS Model #s RL-K18F1M4 / RL-W19D1L5 / RL-K19D1L5 /Malibu B 1 pc. - Kamado Grill C 2 pcs. - Back Side Poles D 2 pcs. - Front Side Poles E 1 pc. - Fire Bowl Step 1: Cart & Grill Assembly • Unpack cabinet cart from packaging. (Step 1a) • Wheels, door and posts are preassembled. STEP 1a G G* 1 pc. Cast Iron Grate 1 pc. Bottom Flip Grate F 1 pc. Top Flip Grate *Malibu Only H 1 pc.
PAGE 2
Step 1 (continued): Grill Assembly STEP 1d •(Step 1d:) Lower fire bowl into grill with the ash drawer opening lined up with the opening in the main ceramic body. Place cast iron grate with attached starter pocket into fire bowl. Align tabs of starter pocket with electric starter port in fire bowl. • Insert front side poles over front posts. Snap post into place by lining up holes in poles with spring loaded pins on each post.
PAGE 3
STEP 5 Step 5: Complete Assembly • Place cooking grates onto grill with hinged section facing towards front of grill. • Close lid and press top vent onto grill with calibrations facing the front (Step 5). Step 6: Using the Electric Starter • Place required amount of charcoal inside fire bowl and completely open bottom and top vents to maximize air flow. • Flip open electric starter door and insert electric starter as far in as possible. Plug in electric starter.
PAGE 4
SIGNATURE SERIES RENDEZVOUS ENGLISH Model #s RL-K18F1M4 / RL-W19D1L5 / RL-K19D1L5 /Malibu 1.2 PARTS 1.1 1* PART NAMES 2.1 2 3 14 10 6** 21 *Malibu Only 8 7 11 9 5 13* 13* 17 4 15* 16* 15.1* 16* 12* 20* 18 20* 18 19 PART NUMBERS 1 19 Cast Iron Top Vent Stainless Steel Top Vent 1.1 Bakelite Tab 1.2 Smoker Knob 2 Ceramic Dome Lid 2.