Content Introduction Safety Precautions 2 Important Safety Instructions 3 Caution 4 Features 4 Front Panel and Rear Panel Illustration 5 Remote Control 6 Connections TV set Connecting 7 Digital Audio Connecting 8 Advanced Features Function Operation 9 SYSTEM setup 12 Others Troubleshooting 19 Specifications 20 1
AVIS RISQUE CHOC ELECTRIQUE NE PAS OUVRIR 2
11. Please follow it strictly. 12. 4. 13. 5. 6. 14. 7. 15. 16. 8. 17. 9. 10. 18.
Please use the original box and packing materials for safe transportation of this product. It is normal for the cover and rear panel to become warm after the player has been operation for an extended period of time. Do not move this product during playback. Doing so may cause damage to the pickup and the disc. Press OPEN/CLOSE on the front panel or remote to open or close the disc tray. Do not push or touch the tray while it is opening or closing.
Front panel 1 2 3 4 5 6 9 1 POWER 5 SENSOR 2 CABIN DOOR 6 3 BD LIGHT 7 PLAY/PAUSE BUTTON 4 VFD SCREEN 8 STOP BUTTON OPEN/CLOSE BUTTON 7 8 PREV BUTTON 10 NEXT BUTTON Rear panel(2CH Audio output) 1 2 3 4 5 6 7 1 2 CH Audio output(L,R) 2 COMPOSITE VIDEO output 3 Component Video output (Y, Pb, Pr) 4 Digital Audio COAXIAL output 5 Digital Audio OPTICAL output 6 HDMI output 7 SERVICE Rear panel(7.
Introduction Remote Control Remote Control STANDBY STANDBY OPEN/CLOSE 20 1 ANGLE SUBTITLE AUDIO 2 21 ANGLE POP MENU/TITLE MENU 3 RANDOM 22 4 5 POP MENU/TITLE SECONDARY AUDIO MOVE( 6 BONUS VIEW SECONDARY AUDIO SECONDARY SUBTITLE 7 23 8 ) 24 SETUP ENTER 9 COLOUR (RED, GREEN, YELLOW, BLUE) SECONDARY SUBTITLE STEP SETUP 25 REV DISPLAY STEP SLOW FWD PREV 10 11 26 REV FWD NEXT 27 12 28 VOL+ 29 VOL- VOL 0-9 NUMBER KEY REPEAT 33 A-B 34 RETURN BONUS VIEW ENTER 13
Connections HDMI Y U V R L VIDEO AUDIO IN VIDEO IN YPbPr IN HDMI IN CONNECT BD PLAYER TO TV SET BY AV CABLE Connect the BD player s L and R jack to the audio input jack on the TV. Connect the BD player s video out jack to the video input jack of TV. CONNECT THE BD PLAYER TO TV SET USING THE Y/Pb/Pr JACKS Use the COMPONENT Cable(not supplied) to connect BD player to your TV. Set the [Primary output] to [Component]. Connect the BD player s L and R jack to the audio input jack on the TV.
Connections Connecting to an AV Amplifier with Digital Audio Input Optical cable Coaxial cable or Coaxial Optical Digital Amplifier Notes: 1. Select the Coaxial or Optical digital audio output. 2. Set the digital Amplifier to the AV input connected to the BD player.
FUNCTION OPERATION , Function Buttons OPEN/CLOSE To open the disc tray, press OPEN/CLOSE; To close the disc tray, press OPEN/CLOSE again. AUDIO During BD, DVD playback, press AUDIO can select different audio language. During VCD playback, press AUDIO button to switch between LEFT/RIGHT/STEREO channels. SUBTITLE Press the button to choose different captions(Requires support from disc). RANDOM During CD playback, press RANDOM button for random sequence playing.
FUNCTION OPERATION NEXT During BD, DVD,CD or VCD playback, press NEXT toplay the next chapter, title or track. PREV During BD, DVD, CD or VCD playback, press PREV to play the previous chapter, title or track. Play In pause state or stop state, press the button, the player will be in playing state. MUTE Press MUTE to turn off the audio, press MUTE again to resume normal sound. Pause In play state, press the button for the first time and the player will be in pause state.
FUNCTION OPERATION POP MENU/TITLE Press the button to enter the appointed title.(Requires disc support) During BD playback, press the button to display the disc s popup menu. REPEAT Each press of the REPEAT button will change the repeat mode. During VCD, CD playback, there are three modes: repeat Single, repeat ALL and Off. During BD, DVD playback, there are three modes: Repeat Chapter, Repeat Title and OFF. Note: During VCD playback, the PBC mode must be set to Off.
SYSTEM SETUP BD Player Setup Menu Press SETUP button on remote controller under STOP or TRAY OPEN status to enter Main menu. In Main menu, press UP/DOWN button to select desired sub-menus and press ENTER button to switch to other sub-menus. In sub-menus, LEFT/RIGHT button are used to change options for desired items which will be highlighted. A. Main setup menu for 2 channel player Language Menu Display Menu Audio Menu Parental Password Menu Diagnostic Menu EXIT ENTER: switch menu item : make choice B.
SYSTEM SETUP 1.3 Menu Language: Select default menu language for BD/DVD. 1.4 OSD Language: Select your language for player OSD. 1.5 BACK: Return to main setup menu. 2. DISPLAY SETUP Select Video in the setup menu, and display the Video submenu: Display TV Type TV Aspect Resolution Color Space Film Mode BACK Menu NTSC 16:9 1080i xvYCC off To Index Menu ENTER: switch menu item : make choice 2.1 TV Type: Select TV type. 2.2 TV Aspect:: Select display configuration for disc.
SYSTEM SETUP 3. Audio setup menu A. For 2 channel player Audio Menu Digital Output PCM Downsampling Dynamic Range Control BACK PCM 48KHz Off To Index Menu ENTER: switch menu item : make choice B. For multi-channel player Audio Menu Digital Output PCM Downsampling Dynamic Range Control Bass Crossover Freq BACK PCM 48KHz Off Off To Index Menu ENTER: switch menu item : make choice 3.
SYSTEM SETUP 3.2 PCM Downsampling: Sets maximum sampling rate for the SPDIF digital audio output (as some SPDIF receivers do not support 192 kHz or even 96 kHz). 48 kHz: Downsample audio with sample rates over 48 kHz. 96 kHz: Downsample audio with sample rates over 96 kHz. Off : No downsampling on SPDIF output. 3.3 Dynamic Range Control: Reduces loudness difference between soft and loud parts of the audio track. On: Enables dynamic range control for all codecs.
SYSTEM SETUP 4.1 Parental Country: Select the movie intended for your residential area. USA: Parental country set to USA. International: Parental country set to others 4.2 Parental Control: Activate parental control. Off: Turn off parental control. On: Turn on parental control. 4.3 Parental Level Select parental control level, disc cannot be played if preset level on disc exceeds the level user set. 1.Kid Safe 2.G 3.PG 4.PG-13 5.PG-R 6.R 7.NC-17 8.Adult 4.4 Parental Password: Set parental password.
SYSTEM SETUP Speaker Menu Front L-R Center Surround L-R Rear L-R Subwoofer BACK Large Large Large Large On To Index Menu ENTER: switch menu item : make choice 6. Diagnostic Menu Reload Default Setting? (Okay/Canel) OKAY Erase nonvolatile storage OKAY ENTER: switch menu item : make choice Use UP/DOWN to select item, than use LEFT/RIGHT key to change option (OKAY or Cancel).
SYSTEM SETUP For music files, in pop up menu, user can add current file into playlist as favorite songs, and set current file as background music while JPEG slide show. Play Add Play List Set As BGM For Playlist operation, in pop up menu, user can set play mode, audio mode, and remove songs which have been added into playlist.
Make sure the Main unit’s POWER button is on. Ensure you have entered the correct AV input for your TV.
Specifications Power requirements: AC 100-240 Volt, 50/60Hz Power consumption: 35W Unit Weight: 2.5kg Discs COMPATIBILITY: BD,DVD,DVD+/-R/RW,VCD,CD-DA,CD-R/RW. Video out Video out: 1.0V(p-p)/75 , sync, negative polarity, RCA pin jack x 1 Audio out 2 channel out: RCA pin jackx2 7.1 channel out: RCA pin jackX8 (optional) Coaxial out: 0.