Instructions / Assembly

CUT THE TOP AND BOTTOM RAILS
Using the measurements from Step 2,
SUBTRACT 2-1/2”(63MM) FROM THE TOP GUIDE
SUBTRACT 2-1/4”(57MM) FROM THE BOTTOM GUIDE
Cut the rails to size.
5
CRIMP WEATHER STRIPS
Crimp in the upraised channel lip on the inside of each corner of the to keep
the J-Pile / Weather Strip from moving, as shown at left.
6
MILANO 100 INSTALLATION INSTRUCTIONS PAGE 10
SURFACE INSTALLATION
INSTALLING THE TOP AND BOTTOM GUIDE RAILS
Slide the B-Bottom Guide Rail fully onto the tab on the A-Screen Cassette
End Cap [7.1].
NOTE: The Bottom and Top Rails each have decorative grooves on
one side. This groove should face the outside [7.2].
Slide the C-Top Guide Rail onto the tab of the A-Screen Cassette
Assembly [7.3].
DECORATIVE
GROOVES
C
B
B
A
A
C
7
7.1
7.3
7.2