Spec Sheet

Wireless Property Protection
PowerMaster Family with PowerG Technology
-10-
PowerMaster-10 G2
This small, sleek control panel is the first in a new family of
PowerG-enabled control panels. It delivers all the advanced
features that PowerG technology provides to intrusion alarm
systems:
t Two-way communication ensures there are no lost alarms and
eliminates all unnecessary re-transmissions
t Multiple frequency channels (up to 50) and Frequency Hopping Spread
Spectrum (FHSS) technology overcome interferences to wireless
communication
t Transmission range is far greater than the industry standard (2000m,
6500ft Line of sight*) enabling repeater-free installations even in large
premises
t Customized configuration templates enable configuration of the devices
collectively instead of individually
t Wireless signal quality indication visible on all devices
t Powerful diagnostic tool indicates RF link quality to show immediate
problems and to verify installation in house setup
t Remotely review and/or change configuration and status of all
peripherals
t Initiate remote walk test with assistance from anyone in the house
t Devices dynamically optimize their route to the control panel using
available repeaters according to changes in the environment
t Communication is protected by the proven AES-128 encryption
algorithm against sophisticated intruders, “code grabbing”, message
substitution, etc.
t Minimum power consumption and “air pollution” due to adaptive
transmission power
t SirenNet- When an alarm occurs- whether triggered by burglar, fire,
panic, or safety devices - all installed smoke detectors, CO detectors
and Siren/Strobes leverage their built-in buzzers to sound the alarm.
This formidable siren network is a powerful cost-saving and lifesaving
application for large homes and commercial sites.
*Measured line-of-site transmission range: 2000m/6500ft @ 8m/24ft, 750m/2500ft @ 2m/6.5ft