FCC Application for Vi sonic Inc «FCC ID: GSAMCT104 « Report No. 980963 30-Dec-98 EXHIBIT 7 7.0 Instruction Manual Attached is a draft instruction manual for the devices. Note the required FCC label and warning information on the first and second pages. The Manual shown is for the MT-101, MT-102, and MT-104.
Hand-Held Power Code Transmitters MT-101, 102, 104 [4 Vi sonic Ltd Installation Instructions 1. INTRODUCTION The MT-101 (one button), MT-102 (2 buttons) and MT-104 (4 buttons) are hand-held, Power Code UHF transmitters, especially designed for use in supervised alarm and remote control) systems. Transmission is activated by depressing any one of the transmit push buttons on the unk.
Figure 2. Opening the Case D. Extract the transmitter module from the base by grasping the battery holder and puling out i TRANSMIT TRANSMIT MODE 7 SELECTORS TRANS BATTERY SWITCH 1 BITCHY SWITCH HOLDER LEQ PLASTIC x INDICATOR SWITCH SWITCH 4 STANDOFF BASE Figure 3. Component Layout TRANSMIT TRANSMIT E.
FCC Application for Vi sonic Inc «FCC ID: GSAMCT104 « Report No. 980963 30-Dec-98 This page intentionally left blank. Curtis-Strauss LLc « 527 Great Road « Little ton, MA « TEL (78) 486-8880 + FAX (978) 486.