FCC Application for Vi sonic Inc «FCC ID: GSAMCT231 » Report No. 980210 1-Jun-88 EXHIBIT 7 7.0 Instruction Manual Attached is a draft instruction manual for the device. Note the required FCC label and warning information on the first page. The Manual shown is for the M CT-201AT. The manual for the MT-231 is identical with regard to FCC labeling information.
M CT-201AT Al-Tight Power Code Pendant Transmitter i= Vi sonic Ltd Installation Instructions 1. INTRODUCTION The M CT-201AT is a miniature air-waterproofing transmitter, designed for use in advanced, high security alarm od remote central systems. Transmission is initiated by depressing the push button at tha center of the unit. When activated, tha transmitter sends out a 24. bit ID code and an alarm cods, both quantifiable by compatible Sowers type receivers.
.2 Key-ring Installation A. Remove the chain by opening and slipping # through the triangle or wp of the M CT-201AT. RB Dirge the tie of a loggias piers into the triangle and pen it. ©. Remove the triangle D. Open the plastic bag which steins the keying iit. E.
MT-231 Pendant Code-Secure™ Transmitter <1 Vi sonic Ltd Installation Instructions INTRODUCTION Tie MT-231 is a miniature pendant transmitter, degrade for lama and remote control applications. When activated, the transmitter seance out a Code Secure™ digital sequence identifiable by compatible Cods Secure™ erosive.
3.3 Opening the Case A. To open tha case, radar ta Figure 2. insert an 1/8 inch screwdriver Blade in the slot at the bettors of the cave. Press the bide inward, applying moderate pressure, and while pressing, swing the handle sightly down until the covers partially separate. PILE are Figure 2. Opening tha Case Warming! Do nat try to open tha sacs by inserting @ Screwdriver in places other than the slot. Thai er damage the transmitter. B.
