User guide

Chapter 6: Data Details Tables
DE5450S Remote Programmer Guide Rev. 9 27
Data Indications
This table is applicable to the PowerG models.
The various data tables display data that has been uploaded to the remote
management from the PowerMaster system’s various devices, such as the
control panel, detectors, keyfobs, and sirens. When configuration or status
data is modified and/or downloaded, the table entries are color coded to
indicate the status of the displayed information:
• Green – Data remains unchanged.
• Red – Data has changed since the last upload.
• Yellow – Data upload is in process – when finished, the entry turns to
green or red accordingly.
• Gray – This parameter is not applicable to the device.
6.1 Site Information
Site Information displays general information about the site control panel.
Panel Site Name: The name of the site where the control panel is installed. By
default this field receives the name of the detected panel model.
System Manager: The name of the System Manager responsible for programming
the control panel, responding to alarms and other events.
Address, City, State, and Zip Code: The complete address of the site.
Panel Phone No.
∗
∗∗
∗
: The telephone number which the PC modem uses to connect
to the control panel.
Additional Information: Additional important information about the
PowerMax/PowerMaster site and facilities.
Primary Phone No.
∗
∗∗
∗∗
∗∗
∗
: The first telephone number the control panel dials.
Primary Communication Mode
∗
∗∗
∗∗
∗∗
∗
: The mode used to call a primary telephone
number.
Secondary Phone No.
∗
∗∗
∗∗
∗∗
∗
: When the primary telephone number is engaged, the
Remote Programmer dials this telephone number.
Secondary Communication Mode
∗
∗∗
∗∗
∗∗
∗
: The mode used to call a secondary telephone
number.
∗
∗∗
∗
Available in PowerMax only.
∗
∗∗
∗∗
∗∗
∗
Available in PowerMax+ only.