User guide

Chapter 6: Data Details Tables
30 DE5450S Remote Programmer Guide Rev. 9
6.7 Internal Siren/Strobe
This defines the operation of the INT output in the control panel.
Internal Siren - enables you to activate the output for a certain amount of (Bell)
time. Strobe - activates the output until the system is disarmed.
6.8 X-10 General Features
∗
This screen enables you to set the general features for the X-10 units. The House
Code must be a letter between A and P that distinguishes this particular PowerMax
X-10 unit from others.
6.9 X-10 Device Settings
∗∗
PowerMax control panel can control X-10 units. This screen enables you to
determine settings for each applicable device.
Some versions of the PowerMax+ include a scheduler that enables you to set
specific times for switching the lights on and off and can also be used with the
PGM. The scheduler allows four regular daily settings and four additional settings
per day.
Figure 6-1: Scheduler
Note: To download/upload the X-10 device settings, you need to select this table
and press the download/upload table button. For further information, see Chapter
8: Data.
Note: When the X-10 device settings table is uploaded, the Remote Programmer will
also load the PGM table. However, this does not occur the other way around.
∗
∗∗
∗
Available in PowerMax+ only
∗
∗∗
∗∗
∗∗
∗
Available in PowerMax+ only