User guide

Chapter 6: Data Details Tables
DE5450S Remote Programmer Guide Rev. 9 31
6.10 External Voice Box
The PowerMax Speech Box is a device that enables home occupants to hear
notifications and converse with the central station from areas of the home that the
panel’s built-in speakers and microphones do not reach.
This table indicates whether or not a voice box is installed and is the only voice
device enabled for communication, or if it is mixed within the protected area.
6.11 Zone Enrollment
This table is applicable to the PowerG models.
This table displays information about the enrollment status and diagnostic quality
of the various wireless zones registered in the system. The information includes
the zone number, device installed in the zone and RF ID, enrollment status, the
zone type (Contact; Motion; Smoke, etc.), received signal strength indication (24-
hour and current RSSI) quality of the device (Strong; Good; Poor; or Not OK),
device configuration, walk-test and a temperature walk-test.
To Pre-enroll a Zone on the Remote Programmer
1. Login to the Remoter Programmer.
2. In the Zone Enrollment table, click an “Unregistered” Action button .
3. In the dialog box that opens, make sure the Add Device radio button is
selected and enter the zone ID.
Figure 6-1: Pre-Enroll Dialog Box
4. Click the Send to Panel button and then click Close.
5. Click the UL Table icon .