User guide

Chapter 6: Data Details Tables
34 DE5450S Remote Programmer Guide Rev. 9
To Perform a Periodic Test
1. Click the Periodic Test icon on the toolbar.
2. Press the self-test button on the siren once and release it.
3. Make sure that “Tested” now appears in the Walk Test column.
To Delete a Siren
1. In the Siren Enrollment table, click the Action button of the siren to be
deleted.
2. From the dialog box, select the Delete Device radio button.
3. Click the Send to Panel button.
4. A new dialog box opens asking Are you sure?; click Yes.
5. Click Close.
The siren is now deleted from the system.
6.13 Keyfob Enrollment (PowerCode)
A Keyfob transmitter is a multi-button wireless unit. They enable the carriers to
perform certain system functions quickly without using the keypad, and therefore
improve system efficiency.
In order that the control panel and the Remote Programmer will recognize the
Keyfob transmitters, each one must be enrolled in the system, and assigned a
keyfob number in the panel. Keyfob initiated events are subsequently identified
and registered with reference to these numbers.
This table displays the keyfob ordinal number, the name of the user carrying this
transmitter, an indication whether the keyfob has been enrolled, the keyfob ID, the
keyfob sync. counter and the keyfob sync. backup.
The Remote Programmer enables enrolling and deleting keyfobs.
To Enroll a Keyfob Transmitter to the Control Panel
In order to perform this procedure , collect the following items together:
A PowerMax control panel, which will be used to pass the keyfob identifying
information from the keyfob through to the PC and from there to the
customer’s control panel.
The keyfob transmitter that is to be enrolled and sent to the customer.