User guide

Chapter 6: Data Details Tables
42 DE5450S Remote Programmer Guide Rev. 9
Figure 6-5: Pre-Enroll Dialog Box
4. Click the Send to Panel button and then click Close.
5. Click the UL Table icon .
To Complete the Enrolling Procedure
6. Stand near the PowerMaster panel. Press and hold the AUX button until
the orange LED turns on, and then release the button. Ensure that the
LED stays on for 2 seconds and then flashes for 10 seconds.
7. Click the UL Table icon .
8. To view the keypad’s RSSI, click OK in the dialog box that opens.
9. Make sure that “Activated” now appears in the Enrolled column.