User guide

Chapter 6: Data Details Tables
46 DE5450S Remote Programmer Guide Rev. 9
Figure 6-7: Status Diagnostics
Note: The Channel Lst. Msg. column displays the last channel on which data was
transmitted between the zone’s installed device and the control panel. When the
transmissions between the control panel and devices change channels, the
channel indication is displayed in various colors, such as the purple and yellow
indications in the above figure.
Condition Description of Yes state
BYPASS Bypassing of zone is enabled.
ALARM Alarm is occurring in zone.
TROUBLE Trouble detected in zone.
OPEN Zone is open. For example, a room door was
opened.
TAMPER ALARM Device tamper is occurring while system is an
Armed state.
TAMPER OPEN Device tamper is occurring while system is either
in Armed or Disarmed state.
LOW BATTERY Battery needs replacement or is not connected.
AC FAILURE Electrical power is not supplied.
INACTIVE Device is not communicating with control panel.
MODE SET – System is armed.