User guide

Chapter 6: Data Details Tables
DE5450S Remote Programmer Guide Rev. 9 49
6.22 Event/History Log
∗
∗∗
∗ ∗
∗∗
∗∗
∗∗
∗
The Event Log displays the different events that the control panel has detected,
together with their details. The Remote Programmer stores up to 100 events. This
table includes: event number; relevant zone or user number/code; relevant zone
name; type of event; date and time.
The History Log displays up to 1000 different events that the control panel has
detected and stored in a different folder.
6.23 Screen Saver
∗
∗∗
∗∗
∗∗
∗∗
∗∗
∗
This function enables you to display any message on the control panel display
screen. The message may contain up to four rows of text (max. of 16 characters on
each row). To activate the screen saver, set the screen saver field at the panel
definition table to an option other than "off".
The screen saver will be displayed on the control panel between the defined
starting day and ending day and between the defined start time and end time of
each day.
∗
∗∗
∗
Available in PowerMax only: Performing Full Upload will automatically load the Event Log.
∗
∗∗
∗∗
∗∗
∗
Available in PowerMax+ only:
• When communicating at the speed of 9600 bps (via serial or GSM digital communication), the Remote
Programmer loads all the data.
• When communicating at the speed of 300 bps (via PSTN or GSM analog communication), you need to perform
Upload Table to load the data.
∗
∗∗
∗∗
∗∗
∗∗
∗∗
∗
Available in PowerMax+ only: