User guide

Chapter 9: Two Download Codes
DE5450S Remote Programmer Guide Rev. 9 63
Chapter 9: Two Download Codes
This document explains the use of two download login codes - located in the
control panel (for further details, see PowerMax/PowerMaster User Guide) - used
for the two types of access codes, as follows:
• Master Installer – used to gain access to all the data in the control panel
(usually used by the central station).
• Installer – used to gain access to all the data in the control panel except for
central station data.
9.1 How It Works
Although Installers and Master Installers use the same software, access levels are
determined by the PowerMax/PowerMaster control panel.
There are two Download code types, as follows:
• Master Download code
• Installer Download code
When performing login using the download codes, the control panel will check the
download code to verify whether it is a Master download code or an Installer
download code.
In the event that the two download codes are identical, the control panel will
respond using the lower privilege (in this case the Installer privilege).
If the control panel responds with the Master privilege, the software is assigned
master privilege and will display all the fields.
If the control panel responds with the Installer privilege, then the software is
assigned Installer privilege and will hide all the central station data.
9.2 Operation
Master Installer First Time Login
When performing login for the first time, the Master installer will enter the Master
Installer download code.
Regular Login
If the PowerMax/PowerMaster control panel accepts this code as a Master
code, the Remote Programmer will assign a Master privilege, and from then
onward the software will be able to use the Master privilege allowing full
access at any time to all the fields (online and offline).
Note: Each time a user opens either an existing or new site he will be able to
view all the data.