User guide

DE5450P 15
7
77
7. DEFINING OUTPUT PARAMETERS
. DEFINING OUTPUT PARAMETERS. DEFINING OUTPUT PARAMETERS
. DEFINING OUTPUT PARAMETERS
7.1 Preliminary Guidance
A. Mode description
This mode allows you to select events and conditions
under which the PGM (programmable) output and X-10
outputs will function.
There are two kinds of memory locations in this sub-mode,
each of which requires a different programming method:
& Multiple Choice Locations: these memory locations
allow you to choose one of several options (see C
below for programming method)
&
&&
& Numerical Data Locations: these memory locations
accept digital data (a code, a time limit etc. - see D
below for programming method).
Should you wish to get an overall view of the entire
process, refer to the programming chart in Figure 6.
You may even use the chart as your only guide along
the programming process, instead of going through
the written step-by-step procedure.
B. Gaining Access to the “Define Outputs” Mode
&
&&
&
Upon gaining access to the installer menu (see Section
1), the display will read “1. NEW INSTL CODE”.
&
&&
&
Click <NEXT> until the 6th mode is displayed:
6.DEFINE OUTPUTS
&
&&
&
Click <OK>. The display will show the first sub-mode:
DEFINE PGM
There are two sub-modes: DEFINE PGM and DEFINE
X-10. You can toggle between them by clicking
<NEXT>.
C. Programming Multiple-Choice Locations
If a multiple choice location is selected, its name will be
displayed as shown in this example:
SET HOUSE CODE
A few options are available, but once you click <OK>, the
currently saved option will be displayed with a dark
selection box at the far right:
house code = A
If you approve of this option, click <OK>. The “Happy
Tune” will sound (- - - –––) and the display will revert to its
previous state (“SET HOUSE CODE” in this case).
If you do not approve, review the other options by clicking
<NEXT> repeatedly. Options that are not saved will have a
clear space at the far right, as shown:
house code = B
To select an option that is not currently saved, click <OK>.
A dark box will appear at the far right. Clicking <OK> once
more will cause your selection to be saved - the “Happy
tune” will sound and the display will revert to its previous
state (“SET HOUSE CODE” in this case).
Figure 6. DEFINE OUTPUTS Flow Chart