User guide

4 DE5450P
ENROLL KEYFOB
C. Click <OK>. The display will read:
Keyfob No: _
D. Suppose that the Keyfob you are about to enroll is to be
designated as Keyfob No. 5. Assuming that memory
location No. 5 is free - no keyfob has yet been enrolled
to it - click the <5> key. The display will change to:
Keyfob No: 5
The clear space at the far right tells you that the
memory location is free.
E. Click <OK>. The display will prompt you to initiate a
transmission from the chosen wireless device:
TRANSMIT NOW
F. Initiate a transmission from the chosen keyfob by
pressing any one of its pushbuttons. In response, the
“Happy Tune” (- - - –––) will sound and the display will
change to:
Keyfob No: 5
A dark box will appear at the far right, indicating that
the chosen Keyfob has been enrolled as Keyfob No. 5.
Note: If the same keyfob is already enrolled elsewhere,
the “Happy Tune” will sound twice in succession.
G. From this point on, you may continue in several
different directions:
• If you wish to enroll another keyfob, select
the desired number by:
-
Clicking <NEXT> to go up (6
%
7
%
8.....)
- Clicking <BACK> to go down (4
%
3
%
2.....)
-
Clicking <HOME>
%
<desired zone #>.
After that, proceed as in the example above.
• To delete keyfob IDs, refer to Para. 3.4.
• To return to the main menu, click
<AWAY>. This will bring back the display:
<OK> TO EXIT
You may now review and select any other
mode on the installer’s menu (by clicking
<NEXT> or <BACK>).
3.4 Deleting Device and Keyfob IDs
Occupied zones or keyfob memory locations must be
cleared (enrolled ID must be deleted) before enrolling a
new ID. To delete an existing ID, proceed as follows:
A . Select the desired zone or memory location. If, for
example you selected Zone No. 15, or keyfob No. 8,
the display will read:
Zone No. 15
or, in the other case:
Keyfob No. 8
B. Click <OK>. The display will change to:
<OFF> to delete
C . Click <OFF>. The display will change to:
Zone No. 15
or, in the other case:
Keyfob No. 8
Note that the dark box at the far right has disappeared.
It is now possible to enroll a new ID. It is also possible
to leave the cleared zone or memory location free, and
simply exit to the main menu.