User guide

USER SETTINGS
28 D-302755
SQUAWK OPTION
SET TIME&FORMAT US FORMAT - 12H EU FORMAT - 24H
TIME _ _:_ _A TIME _ _:_ _
[time] e.g. 07:55P [time] e.g. 19:55
DATE DD/MM/YYYY DATE MM/DD/YYYY
SET DATE&FORMAT
(1)
(1)
(1)
(4)
if not satisfied
if not satisfied
TIME 07:55 P TIME 19:55
squawk disable
sqwk low volume
sqwk mid volume
sqwk hi volume
(To review options, use
or button)
Moving forward
Moving backward
Moving one level
up in the menu
Return to
“<OK> TO EXIT”
To move within
most of
the menus, the following
keys can be used:
Show / confirm
data
DATE: _ _/_ _/_ _ _ _
DATE:_ _/_ _/_ _ _ _
(date)
(2)
(date)
(2)
DATE 30/12/2007 DATE 12/30/2007
(e.g. 30/12/2007)
(e.g. 12/30/2007)
<OK> TO EXIT
(see detail “A”
in next page)
SCHEDULER
INSTALLER MODE
(1)
(1)
Entrance to INSTALLER
MODE (described in
the installer guide)

























READY
(see top of drawing in previous page)
SET BYPASS / SHOW BYPASS / RECALL BYPASS
(see drawing in previous page)
From drawing in
previous page
Notes:
(1) Functions inside black rectangles are accessible only if master user code was entered.
(2) For the year, enter the two last digits only.
(3) Press
to display the number, state and name of first bypassed zone. Press repeatedly to view all the
bypassed zones.
(4) To enter "A" (AM) press
(or one of the 3 keys above it), to enter "P" (PM) press (or one of the 3 keys above it).
(5) SET/SHOW/RECALL BYPASS menus are accessible only if "manual bypass has been selected by the installer.
(6) Applicable in PowerMaxComplete that has VOICE feature - In the SET VOICE OPTION, if you select "enable prompts", the
Control Panel mute speaker button
is active.
Figure 8 - Users Settings Flow Chart

Moving forward
Moving backward
Moving one level
up in the menu
Return to
“<OK> TO EXIT”
To move within
most of
the menus, the following
keys can be used:
Show / confirm
data
     
SET DATE&FORMAT
device number (2-digit)


SCHEDULER

DEVICE No.
(See figure 8)
SUNDAY MONDAY TUESDAY WEDNESDAY FRIDAY SATURDAY DAILY

start - HH:MM
stop - HH:MM
or
TIME - - / - -
(enter start/stop time)

Notes
1. Select time in 10 minute interval only.
2. To erase a displayed time, press OFF.


OPERATION No. 1 OPERATION No. 2 OPERATION No. 3 OPERATION No. 4
THURSDAY
Figure 8 DETAIL "A" - Scheduler Function