FCC ID: ASGARD FCC requirements § 2.1033 INSTALLATION INSTRUCTIONS User's Guide and Installation Instructions furnished to the user of the RD-1 radio transmitting device follow this page and contain 7 pages.
Fee 10, SARONG RD-1 Tab-in-A-Bag™ External Reader a Vi sonic Ltd User's Guide 1. Introduction The Tag-in-a-Bag™ (TAB} Is an access control system, designed 1 limit access lo restricted areas, while permitting authorized people to enter. The integration of the external reader in the TAB system is shown in figure 1. External reader {optional) fo He quest-toexit \e/ command Push-button or mason detector Figure 1 integration of External Reader in TAB Stern 2.
FOC TDG SAVOR WARRANTY Vi sonic Lid. suit ks Substantiates and its affiliates (the Manufacturer’) menswear is products hereinafter referred 1 #5 to Product” or ‘Products 10 bg in conformance wit 45 own plans and specification and ( be ree of Ghettos 1 materials and workbasket under NOMAD use ANG Service 10 5 period of TWANG OTHERS OM the Gaea of shipment by the Manufacturer.
£00 10: ESCAROLE TAG-IN-A-BAG™ Single door RF/ID Proximity Access Control Unit (A Vi sonic Ltd Installation and Programming . INTRODUCTION The TAB (Tag-in-a-Bag)™ is a versatile weather-resistant proximity access control unit (fig. 1), designed to limit access to restricted areas, while permitting authorized people to enter. This product is the best in its class using state-of-the-art proximity {non-contact} RF/ID technology.
Fee [led ge] A. Remove the case closure screw. B. Use a screwdriver, in the bottom recess at the bass, tw lever out the base from the keypad assembly. GC. Place the base on the installation surface, mark points, drill the holes and insert plastic anchors, if necessary, O. Fit the base into the rubber gasket and use the 3 mounting screws to attach the base and gasket to the selected surface.
FEC Ip &SARI + Caution! © When operating the + TAB control unit by AC power, disregard + polarity, but note ! that external buzzers (which sre connected to the Master Rest dumper {For wiring, rafter to external reader cons 1 puritan AUX or PANIC Outputs) require a + separate DC power +supply.
Tab's Modes Description Mode | Mode Name Functions Blinking No. LED 1 ADD (tags) Enables adding user tag | Green 2 SHOW (codes) {Enables checking users [Red codes 3 DELETE (tags) |Enables deleting user tags | Yellow 4 FUNCTIONS setup Enables modifying system | All LED parameters 6.4 Adding User Tags Note: it is recommended to maintain a list of valid tags and user mamas for future reference.
Fe 10: SALLY output on and presenting it again turns the output off. 4. When selecting security level 1 (no PIN code required) it is still possible to enter a PIN code for each tag during programming. However, in normal operation the TAB will not prompt the user for the PIN code. 5. Selecting security level 1 does rot affect the master tag. The master tag always requires a PIN code. 6. Disabling a function, by pressing 00, will show of the display. Programming steps in the SETUP mode: 7) F) term) (7) .
