Model#QR027 Item#1000683980 USE AND CARE GUIDE STAINLESS STEEL RANGE HOOD Questions, problems, missing parts? Before returning to the store, call Customer Service 8:30 am – 5 pm, EST, Monday – Friday 1-800-514-6729 HOMEDEPOT.COM THANK YOU We appreciate the trust and confidence you have placed in Vissani through the purchase of this under cabinet range hood. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty One-Year Manufacturer Defect Warranty. . . . . . . . . . . . . . . . . 4 Warranty Claim Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Pre-Installation Tools/Materials Required. . . . . . . . . . . . . . . . . . . . . .
Safety Information COOKING SAFETY INFORMATION WARNING: To reduce the risk of fire, use only metal duct work. Never use plastic duct work. 1. Never leave the range hood unattended when in use. 2. Never cook over open flames under the range hood. WARNING: To reduce the risk of fire or electric shock, do not use this range hood with any external solid state speed control device. 3. Always turn the range hood on when cooking at high heat or when cooking flaming foods. 4.
Warranty ONE YEAR LIMITED WARRANTY A thorough inspection must be made before installation and any damage must be promptly reported. We will not be liable for failures or damage that could have been discovered or avoided by proper inspection and testing prior to installation. We warrant this product to be free from defects in materials or workmanship for one (1) year from the date of purchase.
Pre-Installation TOOLS/MATERIALS REQUIRED (NOT SUPPLIED) Measuring tape Level Utility knife Marker or pencil Duct tape Adjustable wrench Phillips screwdriver Flathead screwdriver Electric drill or powered screwdriver Safety goggles Safety gloves 5 HOMEDEPOT.COM Please contact 1-800-514-6729 for further assistance.
Pre-Installation (continued) PACKAGE CONTENTS A C B D F E Part Description Quantity A Range hood (including pre-installed controls, lights, blower, aluminum filters and damper) 1 B Lower chimney 1 C Upper chimney 1 D Hood bracket 2 E Chimney support bracket 1 F Duct 1 HARDWARE INCLUDED NOTE: Parts not shown to actual size.
Pre-Installation (continued) 8.74 in. (222 mm) 8.66 in. (220 mm) 57.5 in. (1460 mm) 33.9 in. (860 mm) 2 in. (50 mm) 10.2 in. (260 mm) 29.5 in. (750 mm) 19.7 in. (500 mm) 7 HOMEDEPOT.COM Please contact 1-800-514-6729 for further assistance.
Pre-Installation (continued) PLANNING INSTALLATION WARNING: Always wear safety goggles and gloves during installation. NOTE: Do not remove the plastic covering on the chimney set at this time, as it protects the chimney set from scratches during installation. C Number of people required: 2 or more Carefully check the range hood for damage and for missing parts prior to installation. If there is any damage or if you are missing parts, do not proceed with the installation.
Pre-Installation (continued) 6. Adjust old duct work or install new duct work, as necessary, by following these guidelines: -- Your venting system must vent to the outdoors either horizontally through the back wall (4) or vertically through the roof (5). 7 5 -- A straight, short duct run will allow the hood to perform most efficiently. Long duct runs with elbows and transitions will reduce the performance of the range hood. Use as few of them as possible.
Pre-Installation (continued) WIRING CONNECTION REQUIREMENTS DANGER: Risk of electrical shock. This range hood must be properly grounded. Installation work and electrical wiring must be done by a qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction. DANGER: Turn off the power circuit breaker or the power switch on the junction box before installing this unit.
Installation DRILLING THE PILOT HOLES Ceiling E -- Draw a vertical line (1) on the supporting wall up to the ceiling, or as high as practical at the center of the area in which the hood will be installed. -- Draw a horizontal line (2) at 18 in. (458 mm) above an electric stove or 29.5 in. (750 mm) above a gas stove. 0.8 in. (20 mm) 5.36 in. (136 mm) D -- Place the chimney support bracket (E) on the wall about 0.8 in.
Installation (continued) 3 INSTALLING THE DAMPER (IF NECESSARY) 3 4 WARNING: Sharp edges. Wear safety gloves. CAUTION: Be very careful when installing the dampers. Applying too much force or bending the damper too much may damage or break the damper hinge ends. The damper is pre-installed at the factory. Make sure that it has not come loose during shipping and re-install it, if necessary. -- Insert one end of the damper (3) into the hinge slot (4) at the top of the range hood (A).
Installation (continued) INSTALLING THE CHIMNEY WARNING: Sharp edges. Wear safety gloves. C CAUTION: Minimize movement of the chimney extensions to avoid scratches. -- Remove the plastic covering on the chimney extensions (B,C). -- Lower the upper chimney (C) into the lower chimney (B). You should now have both chimney extensions together as one unit. -- Place the chimney (B) onto the range hood (A), ensuring it fits into the gap on the top of range hood.
Operation NOTE: The fan and lights operate independently of each other. TURNING ON/OFF THE UNIT TURNING ON/OFF THE LIGHTS -- To turn on the fan, press the appropriate speed control switch [Low Speed (2), Medium Speed (3), High Speed (4)] to select the desired level of power. Once a button is pressed, the previous speed mode will be cancelled. -- Press the light switch (5) to turn on and off the lights. -- Press the power switch (1) to turn off the fan.
Maintenance FILTERS DANGER: Turn off the power circuit breaker or the power switch on the junction box before performing maintenance. Touching circuitry inside the range hood while it is energized will result in death or serious injury. When filters wear out, replace them with similar filters that have stainless steel clips. Also replace filters that are damaged with punctures, bends, or broken frames. WARNING: Failure to replace worn out or damaged filters nets will increase the risk of fire.
Care and Cleaning WARNING: Failure to maintain basic standards of care and cleaning of the range hood will increase the risk of fire. RANGE HOOD The range hood should be cleaned regularly (internally and externally) to preserve its appearance and performance. Do: Do Not: -- Always clean in the direction of the grain (original polish lines). -- Do not use corrosive or abrasive detergents, steel wool, or scouring pads. These will scratch and damage the stainless steel surface.
Troubleshooting DANGER: Turn off the power circuit breaker or the power switch on the junction box before performing maintenance. Touching circuitry inside the range hood while it is energized will result in death or serious injury. Problem Solution The range hood will not operate. -- Check that the power supply cable and all electrical wiring are properly connected. -- Check that the power is turned on at the junction box or circuit breaker.
Specifications Range Hood Dimensions 29.5 in. W x 19.7 in. D x 10.2 in. H (750 mm W x 500 mm D x 259 mm H) Chimney Set Dimensions Lower Chimney 8.74 in. W x 8.82 in D x 24.02 in H (222 mm W x 224 mm D x 610 mm H) Upper Chimney 8.66 in. W x 8.74 in D x 24.02 in H (220 mm W x 222 mm D x 610 mm H) Power Rating Speed Control Levels 120 V / 60 Hz / 1.5 A High Medium Max Airflow 400 CFM (+/- 40) Control Type Push Button Illumination 2 x 25 W or Max.
Service Parts STAINLESS STEEL RANGE HOOD If you are missing parts or if you require replacement parts, please call our customer service team at 1-800-514-6729 (8:30 am – 5 pm, EST, Monday – Friday). Identify the required part(s) and have the part code(s) ready.
Questions, problems, missing parts? Before returning to the store, call Customer Service 8:30 am – 5 pm, EST. Monday – Friday 1-800-514-6729 HOMEDEPOT.COM Retain this manual for future use.