User manual

51
Vista QPlus H.264 V2.2 (RP03)
Quantum Plus H.264 installation and user manual
3-5. PTZ Setup
The Quantum Plus can control PTZ cameras via coax or a RS485 connection on the rear of
the DVR. The cameras can have individually selectable Protocols with a choice of Vista
Coax, Vista PD, Pelco P or Pelco D. The Baud rate can also be selected.
3-6. PTZ Controller
The Quantum DVR needs to be setup to accept the VKBD3im or VKBD4 keyboard, as a
default this will be set to the correct Protocol and Baud rate.
ID – This sets the RS485 Address of the DVR.
The Keyboard ID should not be the same as the DVR, see keyboard manual for addressing.