User manual

68
Vista QPlus H.264 V2.2 (RP03)
Quantum Plus H.264 installation and user manual
Relay Follower
This allows the full screen images of several DVRs to be viewed on a single monitor.
A relay can be set to close each time a camera is selected.
This relay closure can be used as the Alarm input to a switcher, such as the VS042A.
If the Monitor outputs from several DVRs are taken to the inputs of this switcher, then
each time a camera is selected, the switcher will change it‟s output to the relevant
DVR monitor picture.
This allows the full screen images of several DVRs to be viewed on a single monitor.
Relay Control
Normal = Relay will close when an alarm activation is received
On = Relay permanently active
Off = Relay not active