User manual

95
Vista QPlus H.264 V2.2 (RP03)
Quantum Plus H.264 installation and user manual
Recording
Global
Normal
Resolution
1. Watermark – security tagging of recorded
video.
2. HDD Overwrite – When the disk is full it
will overwrite the oldest data.
3. The Picture quality can be set
4. Alarm mode can be set between Exclusive
and Normal
5. Non- Alarmed resolution – this is the
resolution that non alarmed cameras are
recorded in during an alarm event
6. Non-Alarmed FPS- this is the rate that non
alarmed cameras are recorded in during
an alarm event
7. Post-Alarm duration – the period alarm
record settings continue for after an event
finishes.
8. Pre-Alarm Resolution – Picture quality for
pre event recording.
9. Pre-Alarm FPS – Picture rate for pre event
recording.
10. Pre-Alarm Duration – Length of pre event.
11. Method – CBR (Constant Bit Rate)
VBR (Variable Bit Rate)
Each camera can individually have its
Resolution, Record rate and whether
Audio is active set from this screen.
Once a single camera has it‟s
parameters set, it is possible to copy
these to all or any other camera, as
shown below