Setup guide

Welcome to the Vista
Welcome to the Setup Guide for the Jands Vista USB Consoles. This guide
is intended to give you the information you need to get your Vista up and
running as quickly as possible.
This Setup Guide should be read in conjunction with the Vista User Guide.
You can find the latest version of the User Guide at www.jandsvista.com.
What is a Vista USB Console?
The Vista USB Console is an operating control surface designed for use
with the Vista software running on a user supplied host computer. In the
case of a S3, S1, or M1 product the host computer is a Windows PC or Intel
Macintosh; in the case of the E2, the host is a Vista T4 or T2 console.
The USB Console and the Vista software for the PC or Macintosh are
purchased and supplied separately, and you’ll need both packages to get
your lighting control system up and running.
The Vista E2 is specifically designed to extend the front panel control
surface of a Vista T2 (or T4) and does not require a computer. The E2 can
only be used in conjunction with a T2 or T4 and connects to it via a USB
cable.
What’s supplied
The Vista control surface is supplied with:
• a USB Type-A to Type-B cable
• an IEC power cable (except M1).
The Vista Software package (purchased and supplied separately) includes:
• a software installation CD
• the Vista User Guide
• a USB dongle – 128, 256, 512, 1024, 2048 and unlimited channel
versions available.