Corporation User's Manual Digital Camera VQ3015

• Setting the Date, Time and Date Stamp:

Use the following procedure to change the date and time setting.

1.Slide the

Function

switch to

(capture status).

2.Press the

Mode

button twice to turn on function menu. Press the

Shutter

button.

3.Press or to adjust the date and time. Press  or 

to advance to the next setting.

5.When finished, press the

Shutte

r button to confirm the setting; press the

button to

return to main menu, press the

Mode

button to exit the menu.

Use the Date Stamp setting to imprint the date on your pictures.

In the Date Time Setting menu. Make sure the VQ3015 clock is set to the correct date.

1. Slide the

Function

switch to (capture status).

2. Press the Menu button and then press or to select [Time Stamp] option.

3. Press  or  to select [Date Only] or [ Date&Time]

4. Press the Menu button to exit the menu.

• Power Saving:

The VQ3015 will automatically power off approximately 30 SEC,1MIN, 3MIN, 5MIN (selectable)

after you do not perform any operation.