Quick Start Guide DIGITAL CAMERA VQ350
WARNING ♦♦♦♦ When the battery icon is blinking, download the pictures to your computer, immediately, and change the batteries; otherwise, your images will be lost.
020606 1.
2. Camera Status Icons The VQ350 has many features to help you maximize your photo experience. Turn on VQ350 and notice the many icons and symbols on the status LCD. As you press the Mode Button the LCD display will change in the order noted below. *To learn more about each function, refer to the referenced section in the more extensive User Manual.
3. Power-ON/Off the Camera Hold down the Power ON/OFF Button for 2 seconds to turn-on/off VQ350 immediately. 4. Capturing Images Step 1: Turn On VQ350 by holding down the Power Button for two seconds. Step 2: Press the Shutter Button to capture an image. 5. Flash Charging Press Mode Button until “ So ” appears on the LCD display, then press the Shutter Button within 3 seconds to start charging the flash. The lightening icon “ ” will blink continuously until it is fully charged. 6.
7. AVI Capture (continued) Step 1: Power on VQ350. Press the Mode Button until the “ ” icon appears on the LCD display. Step 2: Once the Shutter Button is pressed, VQ350 will beep and the camera starts recording videos continuously until the button is released. Step 3: Release the Shutter Button to stop recording. VQ350 will stop recording automatically when the built-in memory is full. When the built-in memory is full, the word “FL” will be shown on the LCD display. 8.
10. Image Resolution Resolution is the size of a digital image measured in pixels (dots), expressed as horizontal number of pixels x vertical number of pixels. The VQ350 offers two resolution modes. The highest (best) resolution is 640 x 480. This is called VGA resolution. The second choice of resolution is 320 x 240. This is called QVGA resolution. VGA resolution images will be the best possible images from VQ350. QVGA resolution images are noticeably smaller when you view them on your computer.
US and Asia whereas 50Hz is most common in UK, Japan, and Europe. To change the frequency, turn on VQ350. Determine the desired frequency. Press the Mode Button until “ 50 ” or “ 60 ” appears on the LCD display. Press the Shutter Button to change the frequency and select the one desired. 13. Using the Flash – Automatic (SA), or On (SF) Press the Mode Button until SA/SF appears on the LCD display. Press the Shutter Button to set the flash to automatic flash (Strobe Automatic) or forced flash (Strobe Forced).