User's Manual

13
4-1-2 Recharging the battery
The battery must ONLY be recharged using the charger integrated into the MI.
Just connect the probe to the mains using the mains power adapter or to the car using the
MI synchronization cable (refer to the connection diagram).
Make sure you observe the recharge temperatures shown in the technical specifications.
4-2 Scrapping the battery
The battery must not be thrown away. It must be returned to the manufacturer for
recycling.
5- Cleaning
Disconnect the power before any cleaning operation. Use a damp cloth. Do not use
solvents.
6- Accessories
Battery Type Li Ion 3.2V 2200mAH 218368073
MI synchronization cable 218365548
Adaptater AC/DC 218365598
Mains adapter cable xxxxx
USB lead 218365556
Measurement leads red, black & blue 218374109
Tests pin red, black & blue 218374120
Crocodile clamps red, black & blue 218374117