User's Manual

Page 8 of 10
WML-C30_User_Manual
25th Oct 2004
COMMERCIAL IN CONFIDENCE
This material may not in whole or part be copied, stored electronically or communicated to third parties
without MITSUMI ELECTRIC CO., LTD’s prior agreement in writing.
Module with antenna
FCC Regulatory information. OEM devise should contain labelling that:
Approved in accordance to FCC rules transmitter module marked by FCC-ID POOWML-C30XX label,
manufactured by MITSUMI incorporated to OEM product. When its not possible, in user manual
should be included such information.
For example :
“This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.” This device contains
FCC-ID POOWML-C30XX
The modules can be integrated in the following ways:
a) if the minimum distance 2,5 cm between the antenna and the body of theuser or nearby persons is
ensured, so a statement in the users manual forend product is not necessary, and product where this
module incorporated can be used as portable application.
b) In case that the distance 2,5 cm between the antenna and the body ofthe user or nearby
persons cannot be ensured, the users manual of the endproduct in which the module will be integrated
has to inform the user about a minimum distance of 20 cm between the equipment and the body if the
equipment is considered for mobile application
c) In case that the distance 2,5 cm between the antenna and the body of the user or nearby
persons cannot be ensured, and equipment, where this module incorporated intend to use as portable
devise, evaluation against the applicable SAR limits is required.
RF-exposure statement. Label example:
RF-exposure statement.
This mobile modular transmitter must have a separation distance of at least 20 cm between
the antenna and the body of the user or nearby persons. With a separation distance of 20cm
or more, the MPE limits are well above the potential this module is capable to produce.
MITSUMI
Company Logo
Module’s Serial
Number