User's Manual

Page 9 of 10
WML-C30_User_Manual
25th Oct 2004
COMMERCIAL IN CONFIDENCE
This material may not in whole or part be copied, stored electronically or communicated to third parties
without MITSUMI ELECTRIC CO., LTD’s prior agreement in writing.
All this labelling will be placed on the final product, clearly visible to all persons exposed to the
transmitter. The specific location on the final product will be consistent with each same final
product, but will vary in location across various final products, and in any case will always be
clearly visible to all persons exposed to the transmitter. The physical size of the label and font size
of the lettering will be dependent on the size of the final product, but in any case will always be
clearly visible to all persons exposed to the transmitter
4.2 Antenna implementation notes.
Any antenna of a similar type witch listed in antenna declaration may be used without retesting.
Use of an antenna of a different type than the tested antenna or one that exceeds the gain of a
tested antenna would require retesting and new approval by either a Telecommunication
Certification Body or the Commission. Manufacturers OEM would be expected to supply a list of
acceptable antenna types with applications for equipment authorization.
External antenna that should be less than +2.14dBi maximum antenna gain can be used.
Model Name Manufacturer Max.Gain [dBi]
HAN8030B2R4GT TDK 2.14
DA095S-2450M NEC TOKIN 2.14
KIA1003 KYOCERA 2.14
AHD1403-244ST01 Mitsubishi Materials 2.14
AHD1206-244ST01 Mitsubishi Materials 2.14
YCE-5223 Yokowo -1
Radio module WML-30## can be incorporated into many different devices. The modules generally
consist of a completely self-contained radiofrequency transmitter missing only an input and a
power source to make it functional. Once the modules are authorized by the Commission under our
certification procedure, they may be incorporated into a number of host devices such as, PCs or
PDAs, which have been separately authorized. The completed product generally is not subject to
requirements for further certification by the FCC.
More detail information present below in chapter 5.
5. Other regulatory notes for OEM.
Modular transmitters save manufacturers the time and any related expenses that would be incurred if
a new equipment authorization were needed for the same transmitter when it is installed in a new
device. This means that it can be integrated into end products without further testing or approval
listing. The manufacturer must state the MITSUMI part number and product reference in his literature
in order to meet the requirements of the Bluetooth and regulatory. This should be clearly indicated in
the OEM manuals.
The purchaser / integrator ( developer) must satisfy all relevant FCC, SAR, EMC and Radio regulations
which apply to their finished product. We believe such parties have the technical competence to ensure
that the systems they deploy continue to comply with all those rules.
Further information and guidance on this subject and other equipment authorization matters can be
found under